Fujitsu SE700 User manual

Edition June 2015
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.vor
English
SE700 / SE500 / SE300
Additive Components
FUJITSU Server BS2000
Operating Manual

Comments…Suggestions…Corrections…
The User Documentation Department would like to know your
opinion on this manual. Your feedback helps us to optimize our
documentation to suit your individual needs.
Feel free to send us your comments by e-mail to:
[e-mail]
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system which
complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
This manual is printed
on paper treated with
chlorine-free bleach.
Copyright © 2015 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source
community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in
other countries.
Novell and SUSE are registered brands of Novell, Inc. in the USA and other countries.
Linux is a registered brand of Linus Torvalds.
Windows® is a registered trademark of Microsoft Corporation.
The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit,
Server Unit x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES
directory on the relevant installation DVD

U41861-J-Z126-1-76
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. Juni 2015 Stand 16:52.14 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.ivz
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Application Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Application Unit AU47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1.1 Front of the Application Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1.1.1 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.1.1.2 Indicators on the operator control panel . . . . . . . . . . . . . . . . . . . . . 13
2.1.1.3 Indicators on the operable drives/components . . . . . . . . . . . . . . . . . . . 14
2.1.1.4 Hard disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.1.2 Rear of the Application Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.2 Switching an Application Unit on/off . . . . . . . . . . . . . . . . . . . . . . . . 22
2.3 Operating system and other software . . . . . . . . . . . . . . . . . . . . . . . . 22
2.4 System operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3 Port extension (Net Unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4 Periphery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.1 ETERNUS JX40 disk storage system . . . . . . . . . . . . . . . . . . . . . . . . 28
4.1.1 Indicator elements (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.1.2 Operating and indicator elements (rear) . . . . . . . . . . . . . . . . . . . . . . . . 31
4.1.3 Problem Solutions and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Contents
U41861-J-Z126-1-76
4.2 ETERNUS LT40 S2 tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.2.1 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.2.2 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.2.3 Operating the tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.2.3.1 Operating panel on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.2.3.2 Remote Management Unit (RMU) . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.2.4 Magazines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4.2.4.1 Removing and replacing a magazine using the OCP . . . . . . . . . . . . . . . . 45
4.2.4.2 Removing and replacing a magazine using the RMU . . . . . . . . . . . . . . . . 46
4.2.4.3 Inserting tape cartridges Into a magazine . . . . . . . . . . . . . . . . . . . . . . 46
4.2.4.4 Mailslots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
4.2.5 LTO tape cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.2.6 Working with the tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.2.6.1 Modes of the tape library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.2.6.2 Device settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.2.7 Error handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.2.7.1 Removing stuck tapes from slots . . . . . . . . . . . . . . . . . . . . . . . . . . 56
4.2.7.2 Tape library error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

U41861-J-Z126-1-76 5
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k01
1 Introduction
The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ
servers in the server line SE servers.
Depending on requirements, the SE server contains all the system components needed for
operation as an overall application:
– /390-based BS2000 Server Unit
– x86-based Server Units with BS2000, Linux or Windows guest systems
– x86-based Application Units for operation under Linux, Windows or VMware
– Shareable tape and disk periphery
– A high-speed, server-internal infrastructure to connect the components with each other
and with the customer LAN or SAN.
The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules,
describes the features and hardware components of the FUJITSU Server BS2000 of the
SE Series. Users should read the operating manuals carefully in order to obtain optimal
performance from the SE server.
This manual describes the optional hardware components such as Application Unit,
redundant Net Unit and peripheral devices, thus complementing the Basic Operating
Manual [1]. You will find a comprehensive introductory chapter in the Basic Operating
Manual . The chapters "Important notes" chapter on SE server operation and "Environ-
mental protection and service" are contained only in the Basic Operating Manual .

6 U41861-J-Z126-1-76

U41861-J-Z126-1-76 7
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
2 Application Unit
In addition to the Server Unit, up to 20 autonomous high-end x86-64 servers, which are
known as Application Units, can also be installed and operated in the rack of the SE server.
Application Units are particularly suitable for important corporate applications. They offer a
high degree of data security and availability through highly-developed hardware and
software components. Their structure (two or four Intel processors of the XEON E7 family)
and their scalability enable them to be employed for a large number of customer applica-
tions, e.g. for medium-sized or large databases, for ERP systems and for subapplications
which interwork with a BS2000 application on the Server Unit.
In comparison to guest systems on XenVMs in an SU x86, further operating systems can
be operated on the Application Unit, and the selection of configured components is greater.
The operating systems and the customer applications on the Application Unit run indepen-
dently of the Server Unit.
The following operating systems can be used for Application Units:
●SUSE Linux Enterprise Server 11 (SLES 11, 64-bit)
●RedHat Enterprise Linux 6.5 and 7
●Windows Server 2008 R2, 2012 and 2012 R2
●VMware vSphere 5.1 and 5.5
●Microsoft Windows Hyper-V Server 2008 R2 and higher
If you want to use other operating systems or virtualization techniques, please contact
Customer Support.
It is the responsibility of the customer to configure the Application Units, and also to
installand operate his/her own software on the Application Units, see the “Operation and
Administration” manual [5].

Application Unit
8 U41861-J-Z126-1-76
Application Units are integrated into the service concept of the SE server, e.g. into remote
service via the MU and into administration with the SE Manager. The following functions are
offered for Application Units in the SE Manager:
●Status display of the Application Unit
●Display and configuration of the links to the web interfaces of the applications on the
Application Unit
●Remote powering on of the Application Units using the iRMC
●Integration into AIS Connect (remote service)
●Storage Management functions via the add-on pack StorMan
Detailed information on this subject is provided in the "Operation and Administration"
manual [5].
An Application Unit occupies four height units (HUs) in the rack.
Up to 20 Application Units can be installed and operated in the rack or extension rack.

Application Unit Application Unit AU47
U41861-J-Z126-1-76 9
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
2.1 Application Unit AU47
AU47s are set up on the same system unit as the PRIMERGY servers RX4770 M<x> and
use the same system board. Differences in the basic units exist to permit integration of the
Application Units into the SE server and to enhance the SE server’s redundancy features.
In the event of questions, e.g. regarding application compatibility, the information for the
PRIMERGY servers RX4770 M<x> also applies for the Application Units of the SE server.
Security functions in the BIOS setup and on the system board protect the data against
manipulation. Information on the security functions in the BIOS is provided in the "D3342
BIOS Setup Utility for FUJITSU Server PRIMERGY RX4770 M1“
(http://manuals.ts.fujitsu.com under the heading Industry standard servers).
iAt present the current model of the PRIMERGY server RX4770 M1 provides the
hardware basis for AU47. When an innovation of the PRIMERGY server takes
place in future, the newer variants will be released as the hardware basis for AU47,
e.g. an RX4770 M2.
Features
Application Units contain two or four Intel XEON processors, have a storage capacity of up
to 6 TB and offer ten PCI express slots.
Detailed information on the various hardware components and interfaces of the Application
Units is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product
site for the relevant server at http://www.fujitsu.com/uk:
ÊGo to Products →Servers →BS2000 →FUJITSU Server BS2000 and select SE700,
SE500 or SE300.

Application Unit AU47 Application Unit
10 U41861-J-Z126-1-76
2.1.1 Front of the Application Unit
Figure 1: Server Unit (front)
1 ID card (green) 5 Video port
2 ServerView Local Service Display 6 3x USB ports
3 Optical drive activity indicator 7 HDD indicators;
8 slots for 2.5" HDDs
4 Operator control panel (for further details see
figure 2 on page 11)
8 SSD indicators;
4 slots for SSDs
햲 햳 햴 햵햶햷
햸
햹
#0
#1
#2
#5
#4
#3
#6
#7

Application Unit Application Unit AU47
U41861-J-Z126-1-76 11
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
Figure 2: Front - Detailed view: Operator control panel
ID card
You can pull the ID card (see figure 1 on page 10) out and push it in again as far as it will go.
The ID card contains various system information, e.g. product name, serial number, MAC
addresses and DNS name.
1 ID button / ID indicator 6 3x USB ports
2 Reset button 7 Video port
3 NMI button 8 HDD/SSD activity indicator
4 On/Off button / Status indicator 9 Global error indicator
5 Status indicator (power cable
connected)
10 CSS indicator
햲햳햴햵햷
햸
햹
햶
햺

Application Unit AU47 Application Unit
12 U41861-J-Z126-1-76
2.1.1.1 Controls
ID Identification (ID) button
Lights up (blue) on the front and on the rear of the server when the ID button
is pressed. The two ID indicators are synchronized.
On/Off switch
When the Application Unit is switched off, it is switched on again by pressing
the On/Off switch once.
When the Application Unit is in operation, it is switched off by pressing the
On/Off switch once.
VCAUTION!
Possible loss of data!
IThe On/Off switch does not disconnect the server from the voltage
grid. To disconnect from the mains completely, remove the power
plugs. These buttons may only be used by Customer Support.
RST Reset button
Pressing the Reset button reboots the Application Unit.
VCAUTION!
Possible loss of data!
NMI NMI button
VCAUTION!
Do not press! Possible loss of data! The NMI button may only be used
by Customer Support.

Application Unit Application Unit AU47
U41861-J-Z126-1-76 13
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
2.1.1.2 Indicators on the operator control panel
ID ID indicator (blue)
Lights up blue when the Application Unit has been selected by pressing the ID
button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView Operations Manager
and the iRMC Web interface, and the status is reported to the ServerView
Operations Manager and the iRMC.
Status indicator (green)
Does not light up when the Application Unit is switched off but is connected to
the power supply (power cable connected).
Lights up green during the power up delay and in normal system operation
(S0).
Status indicator (power cable connected)( green)
on the right-hand side of the On/Off switch
Does not light up in the following cases:
–The Application Unit is not connected to the power source
–The Application Unit Unit is switched on and operating normally (S0)
Lights up green when one of the following cases occurs:
–The Application Unit is switched off but connected to the power supply
(power cable connected)
– The Application Unit is switched on but is in the power up delay
IAfter the Application Unit has been connected to the power source, it
takes approximately 60 seconds until the Application Unit has entered
standby mode.
HDD activity indicator (green)
Lights up green when an internal hard disk drive or a solid state drive is being
accessed.

Application Unit AU47 Application Unit
14 U41861-J-Z126-1-76
2.1.1.3 Indicators on the operable drives/components
Optical drive activity indicator
Lights up green when the storage medium is accessed.
ServerView Local Service Display
A tray mechanism enables you to pull the ServerView Local Service Display out of the
computer housing to read information. Press the front of the module to release the lock.
You can also swing the ServerView Local Service Display out of its normal position at an
angle of 120°. This makes it easier to read the information when the server is located high
up in the rack.
vCAUTION!
If a fault occurs, please contact Customer Support.
Global error indicator (yellow)
Lights up yellow when a prefailure event was detected which requires
Customer Support to become active (by way of precaution).
Flashes yellow when an error was detected which requires Customer Support
to become active.
Does not light up when no critical event has occurred.
If the event is still acute after a power failure, the indicator is activated after the
restart.
The indicator also lights up in standby mode.
You can obtain detailed information on the error cases displayed from the
System Event Log (SEL), on the ServerView Local Service Display, in the
ServerView Operations Manager or on the web interface of the iRMC.
!

Application Unit Application Unit AU47
U41861-J-Z126-1-76 15
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
2.1.1.4 Hard disks
Figure 3: Indicators on a hot-plug HDD module
If a hard disk drive continuously indicates an error, the drive should be replaced by
Customer Support as soon as possible. In this case call Customer Support.
1 HDD BUSY (green)
– Lights up: HDD in active phase (drive active, access to drive)
– Does not light up: HDD inactive
2 HDD FAULT (orange)
– Does not light up: No HDD error
–Lightsup:
HDD Faulty or Rebuild Stopped (drive defective, needs replacing, a rebuild process was
stopped or the slide-in module is not correctly inserted)
– Slow flashing: HDD Rebuild
(the data is being restored after changing a drive)
햲

Application Unit AU47 Application Unit
16 U41861-J-Z126-1-76
SSD indicator
Figure 4: Indicators on the SSD drives
1LED green BUSY
– Lights up: SSD in active phase
– Does not light up: SSD inactive
2LED orange FAULT (orange)
(in conjunction with a RAID controller)
– Does not light up: No error
– Lights up: Faulty or Rebuild Stopped (drive defective / needs
replacing, a rebuild process was stopped or the slide-in module
was not correctly inserted)
– Slow flashing: Rebuild (the data is being restored after changing a
drive)
– Fast flashing: Identify

Application Unit Application Unit AU47
U41861-J-Z126-1-76 17
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
2.1.2 Rear of the Application Unit
Global error indicator and CSS indicator
Figure 5: Global error indicator and CSS indicator, ID button and ID indicator
햳햲

Application Unit AU47 Application Unit
18 U41861-J-Z126-1-76
1 CSS indicator (yellow)
–Lights up yellow when a prefailure event was detected which requires Customer
Support to become active (by way of precaution).
–Flashes yellow when an error was detected which requires Customer Support to
become active.
–Does not light up when the Application Unit is OK.
If the event is still acute after the Application Unit has been switched on/off, the
indicator is activated after the restart.
The indicator also lights up in standby mode.
If the indicator flashes yellow, call Customer Support.
2 Global error indicator (yellow)
–Lights up yellow when a prefailure event was detected which requires Customer
Support to become active (by way of precaution).
–Flashes yellow when an error was detected which requires Customer Support to
become active.
–Does not light up when no critical event has occurred.
If the event is still acute after a power failure, the indicator is activated after the restart.
The indicator also lights up in standby mode.
If the indicator flashes yellow, call Customer Support.
3 ID indicator (blue)
Lights up blue when the Application Unit has been selected by pressing the ID button.
Press the button again to deactivate it.
The ID indicator can also be activated via the ServerView Operations Manager and the
iRMC Web interface, and the status can be reported to the ServerView Operations
Manager and the iRMC.
4 ID button

Application Unit Application Unit AU47
U41861-J-Z126-1-76 19
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
29. June 2015 Stand 16:47.07 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303909_BA_Additional\prod_e\ba_addon.k03
LAN ports
Figure 6: LAN ports on the Application Unit
The MAC addresses entered on the green ID card refer to LAN #1 (SYS1) and #2 (SYS2).
The MAC addresses of LAN ports #3 (not used) and #4 (not used) are then the next two
MAC addresses in ascending order. The green ID card is located on the front of the Appli-
cation Unit, see item 1 in figure 1 on page 10.
1 LAN link/transfer
(System LAN port SYS1
or SYS2)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes green when a LAN transfer is in progress.
2 LAN speed
(System LAN port SYS1
or SYS2)
Lights up yellow for a LAN transfer rate of 1 Gbps.
3 LAN speed Unused port
4 LAN link/transfer
5 LAN speed Unused port
6 LAN link/transfer
햴
햵햲
햲
햳
햳
SYS2
SYS1

Application Unit AU47 Application Unit
20 U41861-J-Z126-1-76
Indicators on the power supply units
Figure 7: Indicators on the power supply units
1 Power supply unit fault indicator and
warning indicator
Lights up amber when a critical event occurs
(power supply unit switches off).
Call Customer Support.
햲