Fujitsu SPARC M10-4 User manual

Fujitsu M10-4/Fujitsu M10-4S/
SPARC M10-4/SPARC M10-4S
Service Manual
Manual Code: C120-E682-07EN
February 2014

Copyright © 2007, 201
4
, Fujitsu Limited. All rig
h
ts reserved.
Ora le
and/or its affiliates provided te hni al input and review on portions of this material.
Ora le
and/or its affiliates and Fujitsu Limited ea h own or ontrol intelle tual property rights relating to produ ts and te hnology des ribed in this do ument, and su h produ ts,
te hnology and this do ument are prote ted by opyright laws, patents, and other intelle tual property laws and international treaties.
This
do ument and the produ t and te hnology to whi h it pertains are distributed under li enses restri ting their use, opying, distribution, and de ompilation. No part of su h
produ t or te hnology, or of this do ument, may be reprodu ed in any form by any means without prior written authorization of Ora le and/or its affiliates and Fujitsu Limited, and
their appli able li ensors, if any. The furnishings of this do ument to you does not give you any rights or li enses, express or implied, with respe t to the produ t or te hnology to
whi h it pertains, and this do ument does not ontain or represent any ommitment of any kind on the part of Ora le or Fujitsu Limited or any affiliate of either of them.
This
do ument and the produ t and te hnology des ribed in this do ument may in orporate third-party intelle tual property opyrighted by and/or li ensed from the suppliers to
Ora le and/or its affiliates and Fujitsu Limited, in luding software and font te hnology.
Per
the terms of the GPL or LGPL, a opy of the sour e ode governed by the GPL or LGPL, as appli able, is available upon request by the End User. Please onta t Ora le and/or its
affiliates or Fujitsu Limited. This distribution may in lude materials developed by third parties. Parts of the produ t may be derived from Berkeley BSD systems, li ensed from the
University of California.
UNIX
is a registered trademark of The Open Group.
Ora le
and Java are registered trademarks of Ora le and/or its affiliates.
Fujitsu
and the Fujitsu logo are registered trademarks of Fujitsu Limited.
SPARC
Enterprise, SPARC64, SPARC64 logo and all SPARC trademarks are trademarks or registered trademarks of SPARC International, In . in the United States and other
ountries and used under li ense.
Other
names may be trademarks of their respe tive owners.
If
this is software or related do umentation that is delivered to the U.S. Government or anyone li ensing it on behalf of the U.S. Government, the following noti e is appli able:
U.S.
GOVERNMENT END USERS: Ora le programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or do umentation, delivered
to U.S. Government end users are " ommer ial omputer software" pursuant to the appli able Federal A quisition Regulation and agen y-spe ifi supplemental regulations. As su h,
use, dupli ation, dis losure, modifi ation, and adaptation of the programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or
do umentation, shall be subje t to li ense terms and li ense restri tions appli able to the programs. No other rights are granted to the U.S. Government.
Dis laimer:
The only warranties granted by Ora le and Fujitsu Limited, and/or any affiliate in onne tion with this do ument or any produ t or te hnology des ribed herein are those
expressly set forth in the li ense agreement pursuant to whi h the produ t or te hnology is provided.
EXCEPT
AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, ORACLE OR FUJITSU LIMITED, AND/OR THEIR AFFILIATES MAKE NO REPRESENTATIONS OR WARRANTIE
S
OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS
OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Unless otherwise expressly set forth in su h agreement, to the extent allowed by appli able law, in no event shall Ora le or Fujitsu Limited, and/or any of their affiliates have any
liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for any indire t, spe ial, in idental or
onsequential damages, even if advised of the possibility of su h damages.
DOCUMENTATION
IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright
© 2007, 2014, Fujitsu Limited. Tous droits réservés.
Ora le
et/ou ses affiliés ont fourni et vérifié des données te hniques de ertaines parties de e omposant.
Ora le
et/ou ses affiliés et Fujitsu Limited détiennent et ontrôlent ha un des droits de propriété intelle tuelle relatifs aux produits et te hnologies dé rits dans e do ument. De
même, es produits, te hnologies et e do ument sont protégés par des lois sur le droit d’auteur, des brevets, et d'autres lois sur la propriété intelle tuelle et des traités internationaux.
Ce
do ument, le produit et les te hnologies afférents sont ex lusivement distribués ave des li en es qui en restreignent l'utilisation, la opie, la distribution et la dé ompilation.
Au une partie de e produit, de es te hnologies ou de e do ument ne peut être reproduite sous quelque forme que e soit, par quelque moyen que e soit, sans l'autorisation é rite
préalable d'Ora le et/ou ses affiliés et de Fujitsu Limited, et de leurs éventuels on édants de li en e. Ce do ument, bien qu'il vous ait été fourni, ne vous onfère au un droit et
au une li en e, exprès ou ta ites, on ernant le produit ou la te hnologie auxquels il se rapporte. Par ailleurs, il ne ontient ni ne représente au un engagement, de quelque type que
e soit, de la part d'Ora le ou de Fujitsu Limited, ou des so iétés affiliées de l'une ou l'autre entité.
Ce
do ument, ainsi que les produits et te hnologies qu'il dé rit, peuvent in lure des droits de propriété intelle tuelle de parties tier es protégés par le droit d’auteur et/ou édés sous
li en e par des fournisseurs à Ora le et/ou ses so iétés affiliées et Fujitsu Limited, y ompris des logi iels et des te hnologies relatives aux poli es de ara tères.
Conformément
aux onditions de la li en e GPL ou LGPL, une opie du ode sour e régi par la li en e GPL ou LGPL, selon le as, est disponible sur demande par l'Utilisateur Final.
Veuillez onta ter Ora le et/ou ses affiliés ou Fujitsu Limited. Cette distribution peut omprendre des omposants développés par des parties tier es. Des parties de e produit
pourront être dérivées des systèmes Berkeley BSD li en iés par l'Université de Californie.
UNIX
est une marque déposée de The OpenGroup.
Ora le
et Java sont des marques déposées d'Ora le Corporation et/ou de ses affiliés.
Fujitsu
et le logo Fujitsu sont des marques déposées de Fujitsu Limited.
SPARC
Enterprise, SPARC64, le logo SPARC64 et toutes les marques SPARC sont utilisées sous li en e et sont des marques déposées de SPARC International, In ., aux Etats-Unis et
dans d'autres pays.
Tout
autre nom mentionné peut orrespondre à des marques appartenant à leurs propriétaires respe tifs.
Si
e logi iel, ou la do umentation qui l'a ompagne, est on édé sous li en e au Gouvernement des Etats-Unis, ou à toute entité qui délivre la li en e de e logi iel ou l'utilise pour le
ompte du Gouvernement des Etats-Unis, la noti e suivante s'applique :
U.S.
GOVERNMENT END USERS: Ora le programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or do umentation, delivered
to U.S. Government end users are " ommer ial omputer software" pursuant to the appli able Federal A quisition Regulation and agen y-spe ifi supplemental regulations. As su h,
use, dupli ation, dis losure, modifi ation, and adaptation of the programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or
do umentation, shall be subje t to li ense terms and li ense restri tions appli able to the programs. No other rights are granted to the U.S. Government.
Avis
de non-responsabilité : les seules garanties o troyées par Ora le et Fujitsu Limited et/ou toute so iété affiliée de l'une ou l'autre entité en rapport ave e do ument ou tout
produit ou toute te hnologie dé rits dans les présentes orrespondent aux garanties expressément stipulées dans le ontrat de li en e régissant le produit ou la te hnologie fournis.
SAUF
MENTION CONTRAIRE EXPRESSEMENT STIPULEE AU DIT CONTRAT, ORACLE OU FUJITSU LIMITED ET/OU LES SOCIETES AFFILIEES A L'UNE OU L'AUTRE
ENTITE DECLINENT TOUT ENGAGEMENT OU GARANTIE, QUELLE QU'EN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE PRODUIT, CETTE
TECHNOLOGIE OU CE DOCUMENT, LESQUELS SONT FOURNIS EN L'ETAT. EN OUTRE, TOUTES LES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES OU
TACITES, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE A UNE UTILISATION PARTICULIERE OU A
L'ABSENCE DE CONTREFACON, SONT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE. Sauf mention ontraire expressément stipulée dans e ontrat,
dans la mesure autorisée par la loi appli able, en au un as Ora le ou Fujitsu Limited et/ou l'une ou l'autre de leurs so iétés affiliées ne sauraient être tenues responsables envers une
quel onque partie tier e, sous quelque théorie juridique que e soit, de tout manque à gagner ou de perte de profit, de problèmes d'utilisation ou de perte de données, ou
d'interruptions d'a tivités, ou de tout dommage indire t, spé ial, se ondaire ou onsé utif, même si es entités ont été préalablement informées d'une telle éventualité.
LA
DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTE AUTRE CONDITION, DECLARATION ET GARANTIE, EXPRESSE OU TACITE, EST FORMELLEMENT
EXCLUE, DANS LA MESURE AUTORISEE PAR LA LOI EN VIGUEUR, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE,
A L'APTITUDE A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.

Contents
Preface xxi
Chapter 1 Before Starting Maintenance Work 1
1.1 Warning/Caution Indications 1
1.2 Warning Labels 2
1.3 Labels/Tags 2
1.4 Safety Precautions 5
1.5 otes Regarding Static Electricity 6
1.6 Other Precautions 7
1.7 Emergency Power Off 8
Chapter 2 Understanding the System Components 11
2.1 Identifying the ames and Locations of Components 11
2.2 Confirming the
Functions of the Operation Panel 16
2.2.1 Display function of the operation panel 19
2.2.2 Control function of the operation panel 20
2.3 Checking the LED Indications 23
2.3.1 Operation panel LEDs 23
2.3.2 LEDs on the rear panel (System locator) 24
2.3.3 LEDs on each component 26
2.4 Confirming the Types of Cable 29
2.4.1 Types of cable 29
2.4.2 Cable connection ports 29
iii

Chapter 3 Trou leshooting 33
3.1 Suspected Failure Conditions 33
3.2 Determining the Causes of Individual Failures 33
3.3 Identifying a Failure 34
3.3.1 Checking the LED indications 35
3.3.2 Checking error messages 35
3.3.3 Checking the status of a component 35
3.3.4 Checking the status of a PCI expansion unit 37
3.3.5 Checking log information 38
3.3.6 Checking the messages output by the predictive self-repairing
tool 39
3.3.7 Identifying the location of the chassis requiring maintenance 40
3.4 Downloading Error Log Information 40
Chapter 4 Preparing for Maintenance 41
4.1 Preparing Tools Required for Maintenance 41
4.2 Confirming the System Configuration 41
4.2.1 Confirming the hardware configuration 42
4.2.2 Confirming
the software and firmware configurations 42
4.3 Understanding Types of Maintenance 44
Chapter 5 Understanding the Preparations for Ena ling Maintenance 53
5.1 Releasing an FRU from the System with the replacefru Command 53
5.1.1 Releasing an FRU of the SPARC M10-4/M10-4S from the system
53
5.1.2 Releasing an FRU of the crossbar
box from the system 56
5.2 Releasing a Chassis from the Physical Partition 57
5.3 Powering Off the Physical Partition Requiring Maintenance 61
5.4 Stopping the Entire System 63
5.4.1 Stopping the system with the XSCF command 64
5.4.2 Stopping the system from the operation panel 65
5.5 Accessing Components 65
5.5.1 Lowering the
cable support 65
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
February 2014iv

5.5.2 Removing the power cord 66
5.5.3 Removing the front cover 68
Chapter 6 Understanding the Preparations for Restoring the System 71
6.1 Incorporating an FRU into the System with the replacefru Command
71
6.1.1 Incorporating an FRU of the SPARC M10-4/M10-4S into the
system 71
6.1.2 Incorporating an FRU of the crossbar
box into the system 73
6.2 Incorporating a Chassis into a Physical Partition 74
6.3 Powering On the Physical Partition Requiring Maintenance 77
6.4 Starting the Entire System 78
6.4.1 Starting the system with an XSCF command 79
6.4.2 Starting the system from the operation panel 79
6.5 Restoring the Chassis 80
6.5.1 Installing
the power cord 80
6.5.2 Fixing the cable support 82
6.5.3 Installing the front cover 83
Chapter 7 Maintaining the CPU Memory Units 87
7.1 Configuration of the CPU Memory Units 87
7.2 Before Maintaining a CPU Memory Unit 89
7.2.1 Types of maintenance 89
7.2.2 Maintenance flow 90
7.2.3 Precautions for replacement 91
7.2.4 Precautions
for installation 92
7.2.5 Precautions for removal 92
7.3 Enabling the Removal of a CPU Memory Unit 93
7.3.1 Active/Cold maintenance 93
7.3.2 Inactive/Cold maintenance 94
7.3.3 System-stopped maintenance 95
7.4 Removing a CPU Memory Unit 97
7.4.1 Accessing a CPU memory unit 97
Contents v

7.4.2 Removing a CPU memory unit from the chassis 101
7.4.3 Removing the CPU memory unit upper 102
7.5 Installing a PCI Express cable 110
7.6 Switching the microSD Card 142
7.7 Installing a CPU Memory Unit 145
7.7.1 Installing the CPU memory unit upper 146
7.7.2 Installing the CPU memory unit in the
chassis 157
7.7.3 Restoring the chassis 157
7.8 Restoring the System 158
7.8.1 Active/Cold maintenance 159
7.8.2 Inactive/Cold maintenance 160
7.8.3 System-stopped maintenance 162
Chapter 8 Maintaining the Memory 169
8.1 Memory Configuration 169
8.2 Memory Configuration Rules 173
8.2.1 Memory mounting rules 174
8.2.2 Checking memory information 177
8.3 Before Maintaining Memory 178
8.3.1 Types of
maintenance 178
8.3.2 Maintenance flow 179
8.3.3 Precautions for replacement 179
8.3.4 Precautions for installation 179
8.3.5 Precautions for removal 180
8.4 Enabling the Removal of Memory 180
8.4.1 Active/Cold maintenance 180
8.4.2 Inactive/Cold maintenance 181
8.4.3 System-stopped maintenance 182
8.5 Removing Memory 183
8.5.1 Accessing memory 183
8.5.2 Removing memory 183
8.6 Installing Memory 184
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
February 2014vi

8.6.1 Installing memory 184
8.6.2 Restoring the chassis 185
8.7 Restoring the System 185
8.7.1 Active/Cold maintenance 185
8.7.2 Inactive/Cold maintenance 186
8.7.3 System-stopped maintenance 187
Chapter 9 Maintaining the Cross ar Units 189
9.1 Configuration of the Crossbar Units 189
9.2 Before Maintaining a Crossbar Unit 190
9.2.1 Types of maintenance 190
9.2.2 Maintenance flow 191
9.3 Enabling the Removal of a Crossbar Unit 191
9.3.1 Inactive/Cold maintenance 191
9.3.2 System-stopped maintenance 192
9.4 Removing a Crossbar Unit 193
9.4.1 Accessing a crossbar unit 193
9.4.2 Removing a crossbar unit 193
9.5 Installing a Crossbar Unit 195
9.5.1 Installing a crossbar unit 196
9.5.2 Restoring the chassis 196
9.6 Restoring the
System 196
9.6.1 Inactive/Cold maintenance 196
9.6.2 System-stopped maintenance 198
Chapter 10 Maintaining the Power Supply Units 199
10.1 Configuration of the Power Supply Units 199
10.2 Before Maintaining a Power Supply Unit 200
10.2.1 Types of maintenance 200
10.2.2 Maintenance flow 201
10.2.3 Precautions for replacement 201
10.3 Enabling the Removal of a Power
Supply Unit 202
10.3.1 Active/Hot maintenance 202
Contents vii

10.3.2 Inactive/Hot maintenance 203
10.3.3 Inactive/Cold maintenance 204
10.3.4 System-stopped maintenance 205
10.4 Removing a Power Supply Unit 205
10.4.1 Accessing a power supply unit 206
10.4.2 Removing a power supply unit 206
10.5 Installing a Power Supply Unit 207
10.5.1 Installing a power supply unit 207
10.5.2 Restoring the chassis 207
10.6 Restoring the
System 207
10.6.1 Active/Hot maintenance 208
10.6.2 Inactive/Hot maintenance 208
10.6.3 Inactive/Cold maintenance 209
10.6.4 System-stopped maintenance 209
Chapter 11 Maintaining the Fan Units 211
11.1 Configuration of the Fan Units 211
11.2 Before Maintaining a Fan Unit 212
11.2.1 Types of maintenance 213
11.2.2 Maintenance flow 213
11.2.3 Precautions for replacement 213
11.3 Enabling the
Removal of a Fan Unit 214
11.3.1 Active/Hot maintenance 214
11.3.2 Inactive/Hot maintenance 215
11.3.3 Inactive/Cold maintenance 216
11.3.4 System-stopped maintenance 217
11.4 Removing a Fan Unit 217
11.4.1 Accessing a fan unit 218
11.4.2 Removing a fan unit 218
11.5 Installing a Fan Unit 219
11.5.1 Installing a fan unit 219
11.5.2 Restoring the chassis 219
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
February 2014viii

11.6 Restoring the System 219
11.6.1 Active/Hot maintenance 220
11.6.2 Inactive/Hot maintenance 220
11.6.3 Inactive/Cold maintenance 221
11.6.4 System-stopped maintenance 221
Chapter 12 Maintaining the Internal Disks 223
12.1 Configuration of the Internal Disks 223
12.1.1 Identification of disk slot 224
12.2 Before Maintaining an Internal Disk 230
12.2.1 Types of maintenance 230
12.2.2 Maintenance flow 230
12.2.3 Precautions for installation 231
12.2.4 Precautions for removal 231
12.3 Enabling the Removal of an Internal Disk 231
12.3.1 Active/Hot maintenance 232
12.3.2 Active/hot maintenance (with DR) 233
12.3.3 Inactive/Hot maintenance 234
12.3.4 System-stopped maintenance 234
12.4 Removing an Internal Disk 234
12.4.1 Accessing an internal disk 234
12.4.2 Removing an internal disk 235
12.5 Installing an Internal Disk 236
12.5.1 Installing an internal disk 236
12.5.2 Restoring the chassis 237
12.6 Restoring the System 237
12.6.1 Active/Hot maintenance 237
12.6.2 Active/hot maintenance (with DR) 238
12.6.3 Inactive/Hot maintenance 239
12.6.4 System-stopped maintenance 239
Chapter 13 Maintaining the PCI Express Cards 241
13.1 Configuration of the PCI Express Cards 241
Contents ix

13.2 Before Maintaining a PCI Express Card 243
13.2.1 Types of maintenance 243
13.2.2 Maintenance flow 243
13.2.3 Precautions for replacement 244
13.2.4 Precautions for installation 244
13.2.5 Precautions for removal 244
13.3 Checking If PCI Hot Plug (PHP) Can Be Used 245
13.4 Enabling the Removal of a PCI Express Card 248
13.4.1 Active/hot
maintenance (with PHP) 248
13.4.2 Active/hot maintenance (with DR) 252
13.4.3 Inactive/Hot maintenance 254
13.4.4 System-stopped maintenance 254
13.5 Removing a PCI Express Card 254
13.5.1 Accessing a PCI Express card cassette 255
13.5.2 Removing a PCI Express card cassette 255
13.5.3 Removing a PCI Express card 257
13.6 Installing a PCI Express Card 260
13.6.1 Installing a PCI Express card 260
13.6.2 Installing a PCI Express card cassette 262
13.6.3 Restoring the chassis 262
13.7 Restoring the System 262
13.7.1 Active/hot maintenance (with PHP) 263
13.7.2 Active/hot maintenance (with DR) 264
13.7.3 Inactive/Hot maintenance 264
13.7.4 System-stopped maintenance 264
Chapter 14 Maintaining the PSU Backplane Unit 267
14.1 Location
of the PSU Backplane Unit 267
14.2 Before Maintaining the PSU Backplane Unit 268
14.2.1 Types of maintenance 269
14.2.2 Maintenance flow 269
14.3 Enabling the Removal of the PSU Backplane Unit 269
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
February 2014x