Fujitsu BS2000 SE Series User manual

Edition April 2017
© Siemens Nixdorf Informationssysteme AG 1995 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.vor
English
SE700 / SE500
Server Unit /390
FUJITSU Server BS2000
Operating Manual
Valid for:
SE700 / SE500 / SE300 (basic software V6.1A and higher)
SE700B / SE500B / SE300B (basic software V6.2A and higher)

Comments…Suggestions…Corrections…
The User Documentation Department would like to know your
opinion on this manual. Your feedback helps us to optimize our
documentation to suit your individual needs.
Feel free to send us your comments by e-mail to:
[e-mail]
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system which
complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
This manual is printed
on paper treated with
chlorine-free bleach.
Copyright © 2017 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source
community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in
other countries.
Novell and SUSE are registered brands of Novell, Inc. in the USA and other countries.
Linux is a registered brand of Linus Torvalds.
Windows® is a registered trademark of Microsoft Corporation.
The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit,
Server Unit x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES
directory on the relevant installation DVD

U41859-J-Z126-2-76
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.02 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.ivz
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Server Unit SU700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 CPU box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Channel box (CHE box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 Server Unit SU500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1 CPU box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.2 Channel box (CHE box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Operating the service processor . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Opening the SVP console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 General SVP frame structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.2.1 System status messages in line 22 . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.2.2 System status messages in line 23 . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2.3 Hardware status display in line 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2.4 Status displays in line 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.3 Using SVP frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.3.1 SVP functions (function keys) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.3.2 Switching between SVP frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.3.3 Options for switching between frames . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.4 SVP frames and subframes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.4.1 (ML) MODE SELECTION FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.4.2 (LD) PROGRAM LOAD FRAME: BASIC . . . . . . . . . . . . . . . . . . . . . . . . 27
4.4.2.1 (LD) PROGRAM LOAD FRAME: DETAIL-1 . . . . . . . . . . . . . . . . . . . . 28

Contents
U41859-J-Z126-2-76
4.4.2.2 (LD) PROGRAM LOAD FRAME: DETAIL-2 . . . . . . . . . . . . . . . . . . . . 32
4.4.3 (ST) STATUS DISPLAY FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.4.4 (MA) MANUAL OPERATION FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4.4.5 (AD) ALTER/DISPLAY FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.4.6 (ME) MESSAGE FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4.4.7 (CH) CH/SUBCH STATUS DISPLAY FRAME: CHANNEL . . . . . . . . . . . . . . . 42
4.4.8 (AU) AUXILIARY FRAME: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.4.8.1 (AU1) AUXILIARY FRAME: REAL CLOCK . . . . . . . . . . . . . . . . . . . . . 45
4.4.8.2 (AU2) AUXILIARY FRAME: IORSF CONTROL . . . . . . . . . . . . . . . . . . 46
4.4.8.3 (AU3) AUXILIARY FRAME: RELATED SCB’S . . . . . . . . . . . . . . . . . . . 48
4.4.8.4 (AU4) AUXILIARY FRAME: POWER STAND-BY/IMPL . . . . . . . . . . . . . . 49
4.4.8.5 (AU5) AUXILIARY FRAME: LOAD PRESET1 . . . . . . . . . . . . . . . . . . . 50
4.4.9 (MF) MSF FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.4.10 (PA) PERFORMANCE ANALYZER FRAME . . . . . . . . . . . . . . . . . . . . . . 54
4.5 Examples of SVP operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.5.1 Selecting IORSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.5.2 Activating IORSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4.5.3 Setting up PROGRAM LOAD FRAME PRESET1 . . . . . . . . . . . . . . . . . . . 59
4.5.4 Setting up PROGRAM LOAD FRAME PRESET2 . . . . . . . . . . . . . . . . . . . 61
4.5.5 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1 . . . . . . . . . . . . . . . . 62
4.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2 . . . . . . . . . . . 66
5 HNC (High Speed Net Connect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
5.1 Front of the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
5.2 Rear of the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
6 What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
6.1 Indicators when a hardware fault occurs . . . . . . . . . . . . . . . . . . . . . . 81
6.2 Performing a system dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

U41859-J-Z126-2-76 5
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.02 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k01
1 Introduction
The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ
servers in the server line SE servers.
Depending on requirements, the SE server contains all the system components needed for
operation as an overall application:
– /390-based BS2000 Server Unit
– x86-based Server Units with BS2000, Linux or Windows guest systems
– x86-based Application Units for operation under Linux, Windows or VMware
– Shareable tape and disk periphery
– A high-speed, server-internal infrastructure to connect the components with each other
and with the customer LAN or SAN.
Information on the hardware lifecycle of the FUJITSU Server BS2000 SE Series
(Changes since the last edition of the manual)
With the hardware lifecycle of the SE series, the hardware basis for the Server Unit x86, the
Management Unit and the HNC has been renewed. These new generation versions are
called SU300 M2, MU M2 and HNC M2. They are supported from basic software V6.2A
onwards.
The FUJITSU BS2000 servers of the SE series that are equipped with this hardware
generation are called SE300B, SE500B and SE700B.
The changes in the manuals are mainly due to these new hardware lifecycle generation
models. Any differences to the previous models regarding structure and operation are
described in detail.
Information on using the manual
The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules,
describes the features and hardware components of the FUJITSU Server BS2000 of the
SE Series. Users should read the operating manuals carefully in order to obtain optimal
performance from the SE server.

Introduction
6 U41859-J-Z126-2-76
This manual described the hardware component Server Unit /390 (SU700 and SU500) and
complements the Basic Operating Manual [1]. You will find a comprehensive introductory
chapter in the Basic Operating Manual . The chapters "Important notes" chapter on SE
server operation and "Environmental protection and service" are contained only in the Basic
Operating Manual .

U41859-J-Z126-2-76 7
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
13. April 2017 Stand 17:48.54 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k03
2 Server Unit SU700
This section describes the Server Unit SU700. SE700 is equipped with an SU700 as the
first Server Unit.
iComponents and ports which are not used are not described below.
The SU700 enables BS2000 to execute (in Native mode on on BS2000 VMs) on /390 archi-
tecture.
Features
– 10 models with a high performance range are available. Depending on the model, one
or two processor modules are used. The processor module has 8 CPUs. Depending on
the model, 2 to 15 processors are available. Capacity on Demand permits temporary
processor attachment.
– One hot spare processor is available with dynamic activation.
– The main memory is up to 256 GB in size.
– The I/O system has up to 126 Fibre Channels, each with a throughput of 8 Gbit/s.
– The SU supports a 10 Gbps LAN (connection via the HNC).
The Server Unit SU700 consists of the following components:
– a CPU box (see section “CPU box”)
– an AROMA-P (Automatic and Remote Operation Manager)
controls the power supply of the SU and occupies two height units (HUs).
– two to eight channel boxes (see section “Channel box (CHE box)”)

CPU box Server Unit SU700
8 U41859-J-Z126-2-76
2.1 CPU box
Depending on the configuration, the CPU box contains one or two system boards.
Each system board contains a processor chip with the following features:
– depending on the model, up to eight CPU cores with a joint cache
– two IOPs (I/O processors)
– one Mac (Memory Access Controller)
– The processor chip is connected directly to the memory of the system board.
– Processors on different system boards communicate over an Inter Connect Interface.
The CPU box, together with AROMA-P, occupies six height units (HUs) in the rack.
2.2 Channel box (CHE box)
Depending on the configuration level, up to eight channel boxes (#0 through #7) and up to
126 FC channels are possible in an SE700. In the basic configuration, the SU700 has two
channel boxes, channel box #0 and channel box #4.
Up to eight channel modules, each with two FC channels (8 Gbps), can be integrated into
a channel box. Only in the case of the first channel box is the first slot already occupied on
the system side.
A channel box occupies two height units (HUs) in the rack.

U41859-J-Z126-2-76 9
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
13. April 2017 Stand 17:48.54 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k04
3 Server Unit SU500
This section describes the Server Unit SU500. SE500 is equipped with an SU500 as the
first Server Unit.
iComponents and ports which are not used are not described below.
The SU500 enables BS2000 to execute (in Native mode on on BS2000 VMs) on /390 archi-
tecture.
Features
– 6 models with a high performance range are available. The processor module has 8
CPUs. Depending on the model, 1 to 3 processors are available. Capacity on Demand
permits temporary processor attachment.
– One hot spare processor is available with dynamic activation.
– The main memory is up to 64 GB in size.
– The I/O system has up to 94 Fibre Channels, each with a throughput of 8 Gbit/s.
– The SU supports a 10 Gbps LAN (connection via the HNC).
The Server Unit SU500 consists of the following components:
– a CPU box (see section “CPU box”)
– an AROMA-P (Automatic and Remote Operation Manager)
controls the power supply of the SU and occupies two height units (HUs).
– two to six channel boxes (see section “Channel box (CHE box)”)

CPU box Server Unit SU500
10 U41859-J-Z126-2-76
3.1 CPU box
The CPU box contains one system board.
The system board contains a processor chip with the following features:
– four CPU cores with a joint cache
– two IOPs (I/O processors)
– one Mac (Memory Access Controller)
The CPU box, together with AROMA-P, occupies six height units (HUs) in the rack.
3.2 Channel box (CHE box)
Depending on the configuration level, up to six channel boxes (#0 through #5) are possible.
In the basic configuration, the SU500 has two channel boxes, channel box #0 and channel
box #5.
Up to eight channel modules, each with two FC channels (8 Gbps), can be integrated into
a channel box. Only in the case of the first channel box is the first slot already occupied on
the system side.
A channel box occupies two height units (HUs) in the rack.

U41859-J-Z126-2-76 11
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.03 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k05
4 Operating the service processor
The service processor (SVP) is operated under menu guidance via the “SVP Console
Window”. The SVP console window is made available by the SE Manager when the SVP
console is called.
Jobs are assigned to the service processor via special SVP frames (in this chapter abbre-
viated to: frames). All the information you require as an operator working with the frames
can be found in this chapter.
After switching on the MU and the Server Unit, BS2000 operation must be prepared, i.e. the
BS2000 operating system must be loaded (IPL = Initial Program Load). The following activ-
ities may be required for the IPL:
●select the IORSF (Input/Output Resource File) and start the IMPL (Initial Micro Program
Load)
This is only necessary if you want to load another IORSF.
●specify the operating mode (Native/VM2000)
This is only necessary if you want to change the mode setting.
●start IPL using PROGRAM LOAD FRAME
To do this you may have to redefine device parameters in the DETAIL-1 frame.
●configure an automatic IPL (POWER ON IPL)
The following sections provide examples of standard processing relevant to loading of
BS2000. There is also an description of how to select a particular configuration and how to
re-initialize the SVP.
Standard processing at the SKP console at a glance:
●Selecting IORSF
●Re-initializing SVP
●Setting up PROGRAM LOAD FRAME: PRESET-1
●Setting up PROGRAM LOAD FRAME: PRESET-2
●Setting the operating mode for "loading BS2000 / VM2000" using PROGRAM LOAD
FRAME: DETAIL-2
●Executing IPL in PROGRAM LOAD FRAME: DETAIL-1

Opening the SVP console Operating the service processor
12 U41859-J-Z126-2-76
4.1 Opening the SVP console
ÊProceed as follows to log in on the SE Manager as an administrator: When you log in
as an operator, the account must have the SVP right.
After you have logged in successfully, you can access the functions of the SE Manager
and consequently also those for operating the operating system (BS2000 or VM2000)
on the Server Unit.
ÊSelect Systems →[<se server> (SE<model>) →] <su-name>(SU</390>), BS2000 operation
mode tab.
ÊClick Open in the SVP console group to open a window with the SVP console.
Information on console access can also be obtained in the SE Manager’s help.

Operating the service processor Opening the SVP console
U41859-J-Z126-2-76 13
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.03 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k05
A new window opens in which a terminal emulation sets up the connection to the SVP
console:
ÊConfirm connection setup with the [ENTER] key.
After a brief wait time, the SVP frame below is displayed:
●After the server has been started: the MODE SELECTION FRAME (see page 24)
●After the SVP console has been closed and opened again or when an SVP console has
already been opened by another user: the last frame displayed.
vCAUTION!
When the SVP frame is opened again or when another SVP console is opened by
another user, the window content is not displayed in full.
Click on [Clear]. This causes the screen to be refreshed, i.e. the frame that was last
output is displayed again in its entirety.
If possible, the SVP should only be used via an SVP console. As frame outputs are
sent to all active SVP consoles, operating multiple SVP consoles at the same time
leads to them impairing each other.

General SVP frame structure Operating the service processor
14 U41859-J-Z126-2-76
4.2 General SVP frame structure
Figure 1: General structure of a frame
Each frame is divided into different areas:
Lines 1 - 21 This is the display area of a frame. Here the functions and parameters that
may be selected or output are displayed. Hardware-related information is
also output.
Line 22 + 23 System status messages and SVP messages are displayed here.
Line 24 Commands can be entered here. Information on the hardware status is
shown as of column 51.
Line 25 This line is used for the status displays of the emulated console.
1-21
22-23
24
25
---- FRAME XXXXXX: YYYYYY ----
Display area
System status messages
Command entry
Status displays at the operating terminal
Line
SVP messages
Hardware status
Column: 50 51

Operating the service processor General SVP frame structure
U41859-J-Z126-2-76 15
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.03 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k05
4.2.1 System status messages in line 22
Figure 2: Format of the status display in line 22
Meaning of the status information in line 22:
Column Icon Meaning
17 - 20 CL -n Cluster ID of the Server Unit (n = 0 - 3)
22 - 26 none
HOST
GUEST
The system is operated in BS2000-NATIVE mode
The selected CPU is occupied by the VM2000 monitor system
The selected CPU is occupied by a VM2000 guest system
28 - 32 CPU - n Display of the selected CPU (n = 0 - F); selection with [PF16]
34 - 38 CHP - 0 Display of the channel processor CHP - 0.
40 -45 none
CLKSTP
I-STEP
H-STOP
The system is in the normal status
The system is in the clock-stop status
The system is in the instruction step mode
The system is in the hardware stop status
47 - 55 SYS-DOWN
CL-STOP
CHK-STOP
COMP-STOP
STOP
WAIT
LOAD
RUN
The system is in the system down status
The cluster is in the clock stop status
The selected CPU is in the CHECK stop status
The address comparison stop mode is active and the selected CPU is
in the address comparison stop status
The selected CPU is in the stop status
The selected CPU is in the wait status
An IPL is executed via the selected CPU
The selected CPU is in the run status
58 -80 none
PSW =
The system is in the run status
The system is in the stop status on the PSW address (PSW=Program
Status Word)
12345678
SYS-DOWN
CL-STOP
CHK-STOP
COMP-STOP
STOP
WAIT
LOAD
RUN
I-STEP
CLKSTP
.... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0
CHP-0CPU-n
HOST
GUEST
CL-n PSW = xxxxxxxx xxxxxxxx
Cluster ID
HOST/GUEST
Target C PU
Target CHP
Rate control Systemstatus
PSW content
H-STOP

General SVP frame structure Operating the service processor
16 U41859-J-Z126-2-76
4.2.2 System status messages in line 23
The following picture shows the extended area of the system status messages in line 23:
Figure 3: Format of the extended area of the status display in line 23
Meaning of the status messages in line 23:
Column Icon Meaning
63 - 64 none
CE
CM
The SVP is in user mode
The SVP is in maintenance mode
The SVP is in hot system maintenance mode
66 - 67 HD
FD
Hard disk 2 or MO (Magneto Optical disk) is online
A formatted floppy disk is mounted in the FD drive
70 - 73 none
TEST
The system is in the user mode
The system is in test mode = maintenance mode
(display together with CE)
75 - 76 none
PW
The power supply is okay
(Power Warning)
An error has occurred in the power supply of the server
78 - 80 none
CHK
No machine error
(machine check)
A machine error occurred in the server
12345678
.... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0
CE HD
FD TEST PW CHK
Maintenance mode
Hard disk/floppy disk
Test mode
Power alarm
System check
CM

Operating the service processor General SVP frame structure
U41859-J-Z126-2-76 17
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.03 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k05
4.2.3 Hardware status display in line 24
The following diagram shows the format of the hardware status display in line 24:
Figure 4: Format of the status display in lines 24 and 25
Meaning of the status information in line 24:
The FLAG code represents a message or error code which can be evaluated by service
department personnel. The display appears according to the severity of the FLAG code
which occurred. As a rule the last FLAG code is displayed.
Column Icon Meaning
2 - 50 cccc .... cccc Command input area
52 - 80 FFFFFFFF FFFFFFFF FLAG code
ccccccccccccccccccccccccccccccccccccccccccccccccccccccc FLAG CODE = FFFFFFFF FFFFFFFF
RA []-[]00

General SVP frame structure Operating the service processor
18 U41859-J-Z126-2-76
4.2.4 Status displays in line 25
Displays in line 25 of the SVP console and their meaning:
If a write console message is output (e.g. SHUTDOWN COMPLETED), line 25 is displayed in the
format of the terminal emulation, and the BEL icon is displayed.
To delete the message and switch the display from line 25, click on [ModSel].
Column Icon Meaning
2 R The console is ready
3 A The SVP is active
10 - 25 none The SVP is ready for input
10 X Input locked
12 - 25 WAIT
SYSTEM
NOT CONNECTED
CONNECTING
After input the keyboard is locked until output is completed
Keyboard still locked because of SVP activity
The MU has no connection to the SVP
A connection to the SVP is being set up
31 none
T
The system is in user mode
The system is in test mode = maintenance mode
32 none
S
The selected CPU is in the run status
The selected CPU is in the stop status
33 none
W
The selected CPU is in the run status
The selected CPU is in the wait status
61 - 70 [ ] - [ ] 00 Status display for hardcopy printers
This display is irrelevant for the MU
For a redundant MU:
ACTIVE This MU has a connection to the SVP
NOT ACTIV The other MU has a connection to the SVP
Spalte Symbol Bedeutung
1 -3 LTG Übertragungsleitung eingeschaltet
21 -23 BEL Signal
56 - 59 TAST Tastatur angeschlossen
61 - 64 FEHL Eingabeversuch bei gesperrter Tastatur
76 - 79 EM:1 Emulationsebene 1
ccccccccccccccccccccccccccccccccccccccccccccccccccccccc FLAG CODE = D90557 X 00000H00
LTG BEL TAST FEHL EM:1

Operating the service processor Using SVP frames
U41859-J-Z126-2-76 19
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. April 2017 Stand 18:05.03 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k05
4.3 Using SVP frames
You assign a job to the SVP by invoking the relevant frame, selecting the desired function,
and specifying the required parameters. To select a function or specify a parameter, you
must enter the alphanumeric characters shown in the frame in the input fields marked by
an arrow (=>). After an entry, the cursor automatically switches to the next entry field. You
can select entry fields manually with the tabulator key or arrow keys. Once you have
entered all the functions and parameters assigned to a job, press the [ENTER] key. In some
frames, SVP functions can also be initiated by actuating the corresponding function key
(also known as pfkey).
Instead of selecting a function, you can also enter a command in the command input line in
all frames (screen line 24) and assign a job to the SVP in this way. Frames can also be
selected using the FRËFrame-ID, e.g. FR ML (to switch to the MODE SELECTION FRAME,
in upper or lower case). A command entered in line 24 takes priority over a selected frame
function.
4.3.1 SVP functions (function keys)
A virtual keyboard is available to you for making entires on the SVP console.
ÊClick the keyboard icon at the top right to open the virtual keyboard. Clicking the icon
again closes the keyboard.
Function keys (pfkeys) [PF1] through [PF24] and [Clear] and [Cancel] are located in the
upper part of the virtual keyboard. You can trigger the corresponding SVP functions by
clicking with the mouse.

Using SVP frames Operating the service processor
20 U41859-J-Z126-2-76
Some function keys are labeled with the name of the function they are most frequently used
for (e.g. [INDEX] instead of [PF2]).
Function key [PF20] (stop function) has no function in order to provide protection against it
being pressed inadvertently and is therefore not offered on the virtual keyboard.
The table 1 on page 20 shows the function keys and their functions which are applicable for
most frames. Any different function allocations of function keys are described in the frames
concerned. As an alternative, SVP functions can be called and entries made in the frames
using your keyboard.
iSome of the function keys listed here only have a function in CE mode
(CE=Customer Engineer, maintenance mode) and are used solely by Customer
Support personnel. Customer Support can enable and disable CE mode on the
server using a sliding switch on the inside of the maintenance panel or on the MU
using a CLI command.
PF.. Function key of the
virtual keyboard
Alternative entry on
the keyboard
Name Function
PF1 [PF1] [ESC] [F1] Help Help functions
PF2 [INDEX] [ESC] [F2] Index Only effective in CE mode:
switches to the index frame.
PF3 [RETURN] [ESC] [F3] Return Switches to the preceding frame.
PF4 [PF4] [ESC] [F4] Frame-specific function is performed.
PF5 [PF5] [ESC] [F5] Frame-specific function is performed.
PF6 [Can/Erase] [ESC] [F6] Cancel/
Erase Input
Command or input data is deleted.
PF7 [Page up] [ESC] [F7] Page up The previous screen contents are
displayed
PF8 [Page down] [ESC] [F8] Page down The next screen contents are displayed
PF9 [PF9] [ESC] [F9] Frame-specific function is performed.
PF10 [PF10] [ESC] [F10] Frame-specific function is performed.
PF11 [PF11] [ESC] [SHIFT] [F1] Frame-specific function is performed.
PF12 [PF12] [ESC] [SHIFT] [F2] Frame-specific function is performed.
PF13 [RECALL] [ESC] [SHIFT] [F3] Recall Previous SVP commands are displayed
in the command line. They can then be
executed again with changed operands
PF14 [PF14] [ESC] [SHIFT] [F4] Frame-specific function is performed.
PF15 [PF15] [ESC] [SHIFT] [F5] Frame-specific function is performed.
Table 1: Function keys for SVP functions (part 1 of 2)