Fukuda FDG231 User manual

FDG231 User Manual
1

Functions
1 Emitting 5 laser points and one laser cross
2 Quick self-leveling and sound alarming when out of
self-leveling range
3 Laser blinking at low battery
4 Freely marking of point or line at pendulum-locked
position
2

Features
1 On/off of laser
2 Battery cap
3 Buzzer
4 Laser emitting status controlling button
5 Working indicator
6 Pulse indicator
7 Pulse switch
3
2
1
3
4
5
6
7

Operation instruction
1 Open battery cap and put in 3pcs AA batteries.
2 Switching the laser between lock or level mode
according to requirement of applications. Sequence of
"Laser" button: All lines&dots on-Only Horizontal line
lights-Only Vertical line lights-Both H and V lines on-All
5 dots on, and so on...
3 Press Pulse switch to work with detector outside door.
The pulse indicator will be turned on. 。
4 Working indicator is in green at normal working status,
There is sound alarming when out of range or at low
battery.
How to use
4

1 The unit is usually in locked position when it is not in
use. Please slide the on/off button to level position or
pendulum-locked position when you start to work.
2 Put the laser on leveling surface during the work.
3 If the surface exceeds self-leveling range of ±4°, the
self-leveling function can not work well.
4 Put the unit to leveling surface in level working
position, if the laser slowly flash but within self-
leveling range, it means low battery, otherwise it
means out of self-leveling range.
5 Make sure to put the unit in power off position when it
is not in use, Take out the batteries.
6 The unit can connect with tripod to work in any height
and position.
Specifications
5

1 Laser source: semiconductor laser diode
2 Wavelength: 635nm。
3 Output power: ≥1mw。
4 Self-leveling range : 4° ± 0.5°
5 Accuracy of plumb up point: 3mm/10m
6 Accuracy of plumb down point: 6mm/10m
7 Accuracy of left,right&forward points: 4mm/10m
8 Accuracy of cross line: 3mm/10m
9 Power: 3pcs AA batteries
10 Continuous working time: about 8 hours.
6