Fumex LF 50 User manual

INSTRUCTIONS FOR USE
General
The LF 50 mobile filter unit for extraction of gases, fumes and
particles, is CE-certified according to the EMC-, LVD-directive.
Please note that electronic equipment is always sensitive for
static electricity, moisture, high temperature, dust and net
disturbance. The equipment is powered with high voltage.
Always disconnect the net plug at service work and at filter changes
on LF 50.
Control and accessories
Mains supply cable is connected to the inlet plug. The fan is started
and controlled with a knob on the fan.
See separate product sheet for complete kits.
The outlet connection (LF VTA) is an accessory for connecting a
separate outlet hose.
Maintenance
For external cleaning we recommend alcohol-based solvents.
TECHNICAL DESCRIPTION
General
A rating plate is placed next to the outlet of the fan. A open dating
sign is placed on the filter. The air humidity must not exceed 75%.
Changing of filter
Replace the filter when the airflow through the filter drops, when
odour can be noticed or after 12 months of use.
Changing of fuses
The fuses are placed in the thyristor in the electric cubicle. Only
qualified personnel is allowed to change fuses. Replace fuse with the
same type and rating only.
Technical specification
Power: 215 W
Voltage: 100 V~, 50/ 60 Hz
Current: 2,5 A
Internal Fuses: 2xF3,15AH-250V
Manufacturing declaration
FUMEX assures that the LF 50 is made in agreement with following
standards:
LVD 73/23/EEG, 93/68/EEG included changes in CE-mark directive 93/68/EEG and
EMC- directive 89/336/EEG, 92/31/EEG.

MANUAL
0414
Produktion: Autotech SPS AB Boliden
LFK 150
LFK 250
LFK 175
LFK 150F LFK 250F
LFK 350C
Local Filter Kit
LF 50
Verkstadsvägen 2, 931 61 SKELLEFTEÅ, Sweden
Tel. [phone], Fax. [phone]
www.fumex.se [email protected]