FURESH FT-918-GT User manual

Place your pet in the tub and secure them with the safety harness.
Once finished bathing drain the tub, wipe off any remaining water,
remove items from side pockets, and pull the handle in the middle to
fold it up.
Questions? Contact [e-mail] any time for answers!
Care and Maintenance
After use, wipe the tub down with a soft damp cloth to clean off any
remaining soap or shampoo.
Do not use abrasive cleaners or ammonia-, bleach-, or
alcohol-based cleaning solutions as they may cause damage or
discoloration.
Dry the metal parts of the frame thoroughly.
Avoid exposing the frame to saltwater or strong chemicals as this may
cause rust to form.
4.
5.
Store in a cool, dry place out of direct sunlight.
Visually inspect the joints and hinges before use to ensure that the
bathtub is in full working order.
Only use attachments/accessories specified by the manufacturer.
Discontinue use and contact customer support if you notice any issues
with your Furesh bathtub.
Warranty and Customer Support
Furesh is covered by a 2-year manufacturer's warranty.
If you need warranty support, would like to obtain replacement parts, or
have other questions, please contact [e-mail].
Furesh and the Furesh logo are trademark(s) of Evergro, Inc.
Furesh Pet Bathtub
with Pull&Pack™ Folding System
lovefuresh.com
User Manual
FT-918-GT & FT-918-BT

Connect the bathtub legs to the bathtub frame by pushing in the
buttons and inserting the leg into the frame until the buttons pop out.
Ensure the buttons pop out of the frame and gently pull on the leg to
confirm it is locked in place. Repeat for other leg.
Note: Legs can be removed for storage or transport - simply push in
the buttons while pulling the legs out of the frame.
Attach the drain hose by sliding the rubber hose sleeve over the outlet
nozzle on the bottom of the tub.
Note: If you are using Furesh outdoors and don’t want to route the
water away from your feet, or plan to use the drain stopper at all times,
the drain hose can be left off.
Warnings
For your and your pet’s safety, please read all warnings BEFORE using the
product and follow all instructions carefully
FALL HAZARD: Never leave pets unattended in the tub; always use the
safety harness during bathing and grooming.
This product is designed for pets only. Do not use this product for
anything other than its intended purpose.
Maximum pet weight: 40 lbs (18 kg). Do not use this product with pets
outside the recommended weight range to avoid injury.
Always place product on a flat, level surface. To avoid injury do not
lean or hang on this product, or allow children to climb into this
product.
Do not fill the tub above the marked maximum water level.
Maximum total weight this product can support: 130 lbs (59 kg).
Do not store the tub in direct sunlight when not in use.
Keep this product and its packaging out of reach of children.
Assembly
Read all instructions carefully prior to assembly and first use of the
product. Keep instructions for future reference.
Package Contents
Before assembling the product, make sure the following parts are
included.
Using Your Furesh Bathtub
1.
2.
To open the tub, place legs on level surface and pull each side of the
tub upwards while pushing down on the middle part of the tub.
Set up the flexible drain hose to drain into a suitable receptacle, or use
the stopper and drain the tub after use.
To position the hose, hold the part of the of the hose closest to the tub
in place while routing the outlet wherever you want the water to flow.
Attach the safety harness by clipping it to all three mounting points.
1.
2.
3.
Assembly Instructions
Bathtub frame
Drain hose
Safety harnessBathtub legs (x2)
HoldHold
Adjust