Furinno 10004 User manual

Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Approx. 20 minutes
Recomm. 1 Person
Unfold Bin (6) and slide it into the completed unit.
STEP 5
Recommended Maximum Weight
Furinno End Table/ Night Stand
Storage Shelf with Bin Drawer
1000420170710
MODEL : 10004
15.5”(W) x 17.8”(H) x 15.5”(D)DIMENSION :
Tools Required
*Unit in Pound(lbs)
15
15
(6)
Customer Support
NEED HELP? For help with assembly, or if you are missing a
part, please call Furinno Customer Service, 1-773-299-8111
from Mon-Fri, 9am-5pm (CST) or email: [e-mail]
www.furinno.com

1
2
3
8pcs
4pcs
4pcs
A 1pcTop Panel
Nail Leg
Chipboard Screw
Dowel
4
5
6
4pcs
4pcs
1pcNon-Wooven Bin
Mini Fix Cap
Mini Fix Bolt
1.1 Install Mini Fix Bolt (5) on Panel (A)
using screwdriver.
1.2 Install Mini Fix Cap (4), Dowel (2) and
Nail Leg (3) to Panel (C) as shown.
STEP 1
Attach both Panel (B) to left side Panel (C)
and tighten with Screw (1) using screwdriver
as shown.
STEP 2
B
C
2pcs
2pcsSide Panel
Shelf Panel
STEP 3
Attach the right side Panel (C) to assemble
unit as shown.Tighten with Screw (1) using
screwdriver.
)
Upright the unit.
Attach Panel (A) to assembled unit as shown.
Lock Mini Fix Cap (4) using screwdriver.
STEP 4
Note:Arrow on Mini Fix
Cap should be pointing
outward.
No Hardware List Qty No QtyParts List
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.