Furinno NT-12035 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Insert Plastic Stopper(3)into
pre-drilled holes on Panel(H).
STEP 5
6.1 Insert Plastic Pin & Nut(4)into the four
corner of pre-drilled holes on Panel(I).
6.2 Insert Plastic Stopper(3)into the balance
of pre-drilled holes on Panel(I).
STEP 6
Recommended Maximum Weight
Furinno Kuib No Tools Contemporary
8-Cube Storage
NT1203520140616
MODEL : NT-12035
23.6”(W) x 41.7”(H) x 11.4”(D)DIMENSION :
*Unit in Pound(lbs)
Note:
To disassemble the Plastic Pin,
use a small stick and push it
downwards.
15
10
10
10
10
10
10
10
10
(3)x 8pcs
(3)x 10pcs
(4)x 8pcs
Tool RequiredTool RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 20 minutesApprox. 30 minutes

STEP 3
3.1 Attach Panel(G)to Panel(B)&(C) using
Dowel (2).
3.2 Attach Panel(A)&(D)to Panel(G)using
Dowel (1).
Attach Panel(E)&(F)to assemble unit.
Turn on cam lock and fix into the
pre-drilled nut.Turn off cam lock when
the panel were fixed.
STEP 4
STEP 1
Insert Dowel(1)into the pre-drilled holes
on Panel(A),(B),(C)and (D).
Fix Lock Switch (5)into the cam lock of
Panel(A),(C)&(D).
STEP 2
(1)x 16pcs
A&C&D
B
slot-in the switch lock
turn on switch turn off switch
Note: Please ensure all panels are
attcahed completely,no gap betwween them.
(2)x 6pcs
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
24pcs
6pcs
18pcs
A 1pcs
Top Panel
Plastic Stopper
No Hardware List Qty No QtyParts List
Short Dowel
Long Dowel
4
5
8pcs
12pcs
Plastic Pin/Nut
Lock Switch
B
C
2pcs
1pcs
Center Shelf Panel
Shelf Panel
D
E
F
1pcs
1pcs
1pcs
Right Side Panel
Bottom Panel
Left Side Panel
G
H
4pcs
1pcs
Back Center Panel
I 2pcs
Back Panel
Center Panel
A
E
F
B
D
G
G
C
G
B
G
H
I
I