Furinno 11157 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Attach assembled unit to Panel(A)and tighten
Cam-Lock Nut(4)using screwdriver.
STEP 4
Install Nail Leg(3)to the bottom of
Panel(D)using hammer.
STEP 5
Unfold Bin(6) and slide into the table.
STEP 6
Recommended Maximum Weight
Furinno End Table Bedroom Night stand
w/Bin Drawer
1115720140430
MODEL : 11157
15.5”(W) x 17.5”(H) x 15.5”(D)DIMENSION :
15
*Unit in Pound(lbs)
(3)x4pcs
Tools RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 30 minutes

STEP 3
Attach Cam-Lock Screw(5)into the pre-drilled holes on Panel(A).
STEP 2
Attach Panel(D)to Panel(B)&(C)and tighten with Screw(1).
STEP 1
1.1 Insert Plastic Dowel(2)to Panel(B)(C)(D).
1.2 Insert Cam-Lock Nut(4)into Panel(D).
Note: Arrow on Cam-Lock Nut(2) should be pointing towards hole.
(4)x1pcs
(2)x2pcs
(2)x8pcs (D)x4pcs
(1)x8pcs
(5)x4pcs
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
8pcs
24pcs
4pcs
A 1pcs
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Chipboard Screw
Plastic Dowel
4
5
6
4pcs
4pcs
1pcs
Non Wooven Bin
Cam-Lock Nut
Cam-Lock Screw
B
C
1pcs
1pcs
Bottom Panel
Shelf Panel
D 4pcs
Leg Panel
unfinised
surface