Furinno 13089 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Attach Panel(B)to Panel(F),as shown.
STEP 6
Attach Panel(D)to assembled unit,as shown.
STEP 7
Upright the unit and slot in Bins(7)&(8).
STEP 11
Attach Panel(H)to the back side using Power
Pin(6)and Hammer.
STEP 10
Attach Panel(C)to assembled unit,as shown.
STEP 8
Attach Panel(A)to assembled unit and lock all
the Cam-Lock Nut(2)using screwdriver.
STEP 9
Recommended Maximum Weight
Furinno Econ Storage Organizer
Cabinet w/Bins
1308920140428
MODEL : 13089
23.8”(W) x 32.3”(H) x 9.3”(D)DIMENSION :
*Unit in Pound(lbs)
20
unfinished
surface
finished
edge
unfinished
surface
unfinished
surface unfinished
surface
(6)x20pcs
(7)&(8)x4pcs
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
finished
edge
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
Tool RequiredTool RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 30 minutes

STEP 4
Attach Panel(H)to Panel(F),as
shown.
Attach Panel(C)to completed unit in Step 3.
Lock Cam-Lock Nut(2)using screwdriver.
STEP 5
STEP 2
2.1 Install Short Dowel(4)on Panel(B),(E),(F),(G)&(E2).
2.2 Install Cam-Lock Nut(2)on Panel(B)&(E2).
2.3 Install Long Dowel(5)to Panel(E),(F)&(G).
Note: Arrow on Cam-Lock Nut(2)should be pointing outward.
STEP 1
1.1 Install Cam-Lock Screw(1)to pre-drilled holes on Panel(A),(C)&(D)using screwdriver.
1.2 Install Cam-Lock Nut(2),Short Dowel(4)and Nail Leg(3)on Panel(C)&(D).
STEP 3
Install Short/Long Dowel(4)&(5)on Panel(F).
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
6pcs
6pcs
4pcs
A 1pcs
Top Panel
Nail Leg
No Hardware List Qty No QtyParts List
Cam-Lock Screw
Cam-Lock Nut
4
5
6
28pcs
6pcs
20pcs
Power Pin
Short Dowel
Long Dowel
7
8
4pcs
4pcs
Big Bin
Small Bin
B
C
1pcs
1pcs
Left Side Panel
Bottom Panel
D
E
E2
1pcs
2pcs
1pcs
Middle Shelf Panel
Right Side Panel
Shelf Panel
F
G
4pcs
1pcs
Bottom Bar
H 3pcs
Back Panel
Center Panel
unfinished
surface
unfinished
surface
(4)x4pcs
unfinished
surface
finished
edge
finished
edge
finished
edge
(1)x2pcs (1)x1pcs
finished
edge
(3)x2pcs
(2)x1pcs
(4)x2pcs
(3)x2pcs
finished
edge
(1)x1pcs
(2)x1pcs
(4)x2pcs
finished
edge
(2)x2pcs
finished
edge
(4)x4pcs
finished
edge
(4)x4pcs
unfinished
surface
(4)x4pcs
finished
edge
finished
edge
finished
edge
finished
edge
(4)x2pcs (5)x2pcs
(4)x2pcs
(5)x2pcs (5)x2pcs
finished
edge
unfinished
surface
finished
edge
finished
edge
finished
edge
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
(2)x2pcs