Furinno 18052 User manual

3
Assembly Instruction
Furinno 4 CUBE CABINET
MODEL : 18052
1805220180710
3
PLEASE FOLLOW BELOW INSTRUCTION
TO PREVENT PRODUCT TIP OVER.
x2
wall
Wall stud
Use the 5/8" screw through the
round hole in a bracket and into
the back edge of the TOP (B).
Round hole
B
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
*Unit in Pound(lbs)
Recommended Maximum Weight
10
10
10
10
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
Recomm. 1 Person
Approx. 20 minutes
Tools Required

12
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTION CAREFULY,
FOLLOW THEM STEP BY STEP.
ASSEMBLY INSTRUCTIONS
HARDWARE & PARTS LIST
2pcs
5pcs
SCREW 20pcs SIDE PANEL
SHELF PANEL
BACK PLUG 16pcs
SCREW COVER CARD 20pcs
2pcs
BACK PANEL
unfinished surface
2
1A
B
B
B
B
B
C
C
A
A
B
B
B
B
B
A
C
Unfinished edge
Unfinished edge