Furinno 99811 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
If necessary,please follow instruction below to prevent product tip over.
STEP 3
Recommended Maximum Weight
Furinno Turn-N-Tube 5 Tier Corner
Display Rack Multipurpose Shelving Unit
9981120140416
MODEL : 99811
11.6”(W) x 57.7”(H) x 11.6”(D)DIMENSION :
*Unit in Pound(lbs)
CABLE TIE
WALL
15
15
15
15
15
1SET
Hardware List Qty
1/4”
DRILL BIT
No Tools Required
Recomm. 1 Person
Approx. 20 minutes

STEP 1
1.1 Attach Round Leg(3)and Top Cap(2)to
Bottom Panel(B).
1.2 Attach Long Pole(1)with Shelf
Panel(A),as shown:
Attach Top Cap(2)to Top Panel(A),as shown:
STEP 2
Long Pole - 12pcs
Top Cap - 1pcs
Round Leg - 4pcs
Top Cap - 3pcs
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
12pcs
4pcs
4pcs
A 4pcs
Top/Shelf Panel
Round Leg
No Hardware List Qty No QtyParts List
Long Pole
Top Cap B 1pcs
Bottom Panel
A
FINISHED
SURFACE
B
FINISHED
SURFACE
A
FINISHED
SURFACE
A
FINISHED
SURFACE
A
FINISHED
SURFACE
B
FINISHED
SURFACE