Furinno STORAGE BENCH FB19113 User manual

No Tools Required
10 min
x 2
ASSEMBLY INSTRUCTIONS
STORAGE BENCH
MODEL: FB19113
FB1911320200121 PAGE 1/3
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order
to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble the product on packaging cardboard to prevent
scratch or damage.
5. Using uncompatible hardware might cause damage to the
product. DO NOT FULLY-TIGHTEN the nut until all nuts
are ready assembled.
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
* Keep all hardware parts out of reach of children.
250 lbs
IMPORTANT NOTES:
* This unit has been designed to support maximum loads:
Exceeding these load limits could cause sagging,
instability, product collapse, and/or serious injury.
* Keep lid closed and secured when not in use.

PAGE 2/3
4PCS
1PC
STORAGE
BENCH
LEG
1
2
1 2
Vented holes at the bottom of
storage compartment allow for
air flow and breathability.
NOTE:
Some parts packed inside the bench.

PAGE 3/3
1
2
2
1
2
Assemble all Legs (2) as shown:
Note: Please remove plastic cap on the screw
before screw in the leg.