Furniture of America Bridgette CM3325PT-5PK User manual

Rev: 15-05-08

I. With the help of another person, carefully place the table top (#1) facing down on a protected surface.
II. Align the legs (#2) to the pre-drilled holes on the table top (#1).
III. Prepare 8 bolt assemblies by FIRST inserting the lock washer (#B) onto the bolt (#A) then the flat washer
(#C) onto that SAME bolt (#A), in that order. Secure using the wrench (#D).

I. Carefully place the backrest with legs (#1) on a protected surface.
II. Align the seat (#2) to the pre-drilled holes on the backrest with legs (#1).
III. Prepare 2 bolt assemblies by FIRST inserting the lock washer (#D) onto
the bolt (#C) then the flat washer (#E) onto that SAME bolt (#C), in that
order. Insert bolt assemblies in the center holes of the seat and secure
using the Allen wrench (#F).

I. Align the front right leg (#3R) and left leg (#3L) to the seat (#2).
II. As you align the legs, insert the front leg support (#5) and leg supports (#4R/L) into the designated
slots along the legs.
III. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#B) then the flat
washer (#E) onto that SAME bolt (#B), in that order. Insert bolt assemblies into the holes on the
corners of the seat and secure using the Allen wrench (#F).