Furniture of America CM3319T User manual

MODEL #
CM3319T
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
1 / 9
VERSION # 20-07-22

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

TABLE
CM3319T
#1 1pc
#A 24pcs
Bolt 5/16"x2-1/2"
#D 44pcs
#E 44pcs
Lock washer
Ø5/16"
Allen wrench
M4
#F 1pc
Flat washer
Ø5/16"
#B 12pcs
Bolt 5/16"x1-3/4"
#C 8pcs
Bolt 5/16"x1-3/8"
Table Top
#2 2pcs
Leaf
#3 2pcs
Table Stand
#4 2pcs
Table Base
#5 2pcs
Stand Base
#6 6pcs
Foot
5 / 9
#1 #2
#4
#3
#6
#5
#5
#6 #6

Table top
Table Leaf
Foot
Table Stand
Table Base
Stand Base
#A 24pcs
#D 44pcs
#F 1pc
#E 44pcs
#1
#2
#6
#3
#4
#5
#B 12pcs
#C 8pcs
6 / 9
CM3319T is packed in 2 cases
Carton Disignation Part Hardware
CM3319T-1
CM3319T-2

ASSEMBLY INSTRUCTIONS
1
Part #5 x2pcs
Hardware #B x12pcs
Part #6 x6pcs
7 / 9
2
Hardware #D x12pcs
Hardware #E x12pcs
#F
#B
#D #E
x2
#5
#6
x2
Part #3 x2pcs
Hardware #A x12pcs
Hardware #D x12pcs
Hardware #E x12pcs
#3
#F
#A
#D #E
Align feet (#6) to the base (#5), then
secure by using bolts (#B) with washers
(#D,E).
Align pedestal (#3) to the base, then secure by
using bolts (#A) with washers (#D,E).

ASSEMBLY INSTRUCTIONS
3
8 / 9
4
x2
Part #4 x2pcs
Hardware #A x12pcs
Hardware #D x12pcs
Hardware #E x12pcs
#F
#A
#D #E
#4
Part #1 x1pc
Hardware #C x8pcs
Hardware #D x8pcs
Hardware #E x8pcs
#F
#C
#D #E
#1
Align table top base (#4) to the
pedestal, then secure by using bolts
(#A) with washers (#D,E).
Align table base to the table top (#1),
then secure by using bolts (#C) with
washers (#D,E).

ASSEMBLY INSTRUCTIONS
5
9 / 9
6
Part #2 x2pcs
#2
Use the locking mechanism on
the bottom of the table top.