Furniture of America CM-BK930-TQ User manual

For more information contact our team: [email protected]
Rev:17-12-22

1. Insert the barrel nuts (#F)
into the holes along the
sides of the lower side
rails (#11,12). Align the
openings to the holes.
2. Insert the long
bolts (#B) into
the holes along
the sides of the
lower headboard/
footboard (#3,4).
Secure using the
Allen wrench (#K).
1. Insert the dowels
(#A) into the holes
along the ends of
the long guard
rails (#6), insert
the other ends
into (#1) and (#2).
2. Insert the barrel nuts
(#F) into the holes along
the sides of the long
guard rails (#6) and the
upper rails (#5,8). Make
sure to align the holes
to the openings.
3. Insert the long bolts (#B) into
the holes along the upper head-
board and footboard (#1,2).
Secure using the Allen wrench.

Repeat process in step #2.
Insert the metal pins (#H) into the holes along the
top of the lower headboard and footboard (#3,4),
then carefully place the top bed onto those pins.

Insert the dowels (#A) into each end of
the steps (#16), then insert a bolt (#G)
into each hole along the rails and
secure using the Allen wrench (#K).
Align the top of the ladder rails to the holes,
then insert a short bolt (#D) from within.
Secure using the Allen wrench (#K).

Place the slat set (#13) on to the top
bed and slat set (#14) onto the lower
bed. Insert a screw (#I) into each hole
and secure using a screwdriver.
Align the support legs (#18) to the
bottom slat set, then insert a screw
(#J) into the holes and secure.
Adjust according to
the ground level.

Safety Warnings for Bunk Beds
1. Read and follow the information on the WARNINGS shown on the end
structure
of
the
upper
unk and on the carton.
2. Do not remove
warning
la el from the ed.
3. Keep these instructions for future reference.
4. IMPORTANT: Must use Bunkie mattress or Bunkie board. The proper
sizes for the UPPER TWIN-SIZE Bunkie mattress or unkie oard
should e
long
and 37-1/2'' - 38-1/2'' wide with no more than 6''
thickness and for the LOWER QUEEN-SIZE should e 80'' - 81'' long
and 60'' - 61'' wide with no more than 6'' thickness.
5. Surface of mattress must e at least 5 inches (127mm) BELOW the upper
edge of guardrails.
6. The M XIMUM weight capacity for the upper unk is not to excee
7. Do not allow children
under
6
years
of
age
to use the
upper
unk.
8. Periodically check and ensure that the guardrails, ladder, handle and other
components are in their proper position, free from damage, and that all
connectors are tightened and secured.
9. DO NOT allow
horseplay,
rough
playing
or
jumping
on the eds and do not
allow
playing
or
hiding
under
the eds.
10. Always use the ladder for entering or leaving the upper unk.
11. Do not use su stitute parts. Contact the manufacturer or dealer for
replacement parts.
12. Use
of
a
nightlight
may
provide
added
safety
precaution
for
a
person
using
the
upper
unk.
13. Always use the guardrails on oth sides of the upper unk.
14. If the unk ed will e placed next to a wall, the guardrail that runs the full
length of the ed should e placed against the wall to prevent entrapment
etween the ed
and the wall.
15. The
use
of
water
or
sleep
flotation mattresses is
prohi ited.
16. No more than one person is allowed on the upper unk at all times
W RNING:
STR NGUL TION H Z RD
Never attach or hang o jects to any part of the unk ed
that are not designed for use with the ed. O jects such as
hanger, hook, elt, ag, rope, string, etc. should not e used
on or around the unk ed.
Safety Warnings for Bunk Beds
!
80'' - 81''