Furniture of America CM-BK603 User manual

1 / 14
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
CM-BK603
VERSION # 21-03-16

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX14

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX14

4 / XXXXXXX14

DAYBED
5 / 14
#1 2pcs #2 2pcs #3 2pcs
#5 4pcs #6 1set #7 8pcs
#4 2pcs
#8 2pcs
#9 1pc #10 2pcs
CM-BK603
Lower End Guardail Upper End Guardail Lower Side Rail Upper Side Rail
Guardrail Full Slat Kit Full Slat Kit
Support Leg
271x40x40mm
Center Support Guardrail Support
#11 4pcs
Ladder Steps
#12 1pc
Ladder Rail (L)
#13 1pc
Ladder Rail (R)
Lower End Guardrail
Upper End Guardrail

#A 24pcs #B 24pcs #C 52pcs #D 6pcs
#E 8pcs #F 2pcs #G 4pcs
6 / 14
#H 2pcs
Bolt
Ø1/4" x 4-7/8"
Screw
#4x30mm
Bolt
Ø1/4"x 1-3/16"
Screw
ɸ9*90mm
Screw
#4x40mm
#I 1pc
Allen Wrench 4mm
Screw
#4x20mm
Barrel Nut
Ø1/4" x 1/2"
Metal Dowel
Ø3/16'' x 2''
#4
#J 6pcs
Hex Cap
Ø1/4" x 5/8"

7 / 14
Exploded View
#3
#12
#13
#11
#3
#5
#2
#6
#7
#1
#2
#4
#10
#9
#6
#5
#10
#1
#8
#4

Carton Disignation Part Hardware
CM-BK603 is packed in 2 cases
#1
CM-BK603-2
CM-BK603-1
Lower End Guardrail
Upper End Guardrail
Lower Side Rail
Upper Side Rail
Guardrail
Full Slat Kit
Support Leg
Ladder Steps
Ladder Rail (L)
Ladder Rail (R)
#2
#9
#10
#3
#4
#5
#6
#7
#8
#Ax24pcs
#B x24pcs
#Cx52pcs
#Dx6pcs
#Ex8pcs
#Fx2pcs
#Gx4pcs
#Hx2pcs
#11
#12
#13
Full Slat Kit
Guardrail Support
Center Support
#Ix1pc
7 / 14
#Jx6pcs

ASSEMBLY INSTRUCTIONS
1
2
9 / 14
Part #1 x 2pcs
Hardware #A x 8pcs
Hardware #B x 8pcs
Hardware #C x 20pcs
Part #3 x 2pcs
Part #6 x 1set
#B
#1
#1
#3
#3
#6
#I
#A
#C
Align lower side rails (#3) to the
lower end guardrails (#1), then
secure by using bolts (#A) onto
barrel nuts (#B).
Align slat kit (#6) to the lower
bunk, then secure by using
screws (#C).

ASSEMBLY INSTRUCTIONS
3
4
10 / 14
Hardware #F x 2pcs
Part #2 x 2pcs
Hardware #A x 16pcs
Part #4 x 2pcs
Part #5 x 4pcs
Hardware #B x 16pcs
#I
#A
#2
#2
#4
#5
#4
#5
Part #8 x 2pcs
#F
#8
#B
Align support legs (#8) to the
slats (#6), then secure by using
screws (#F).
Align upper side rails (#4)
and guardrails (#5) to the
upper end guardrails (#2),
then secure by using bolts
(#A) onto barrel nuts (#B).

ASSEMBLY INSTRUCTIONS
5
6
11 / 14
Part
Hardware #C x 2pcs
Part #9 x 1pc
#7 x 1set
Hardware #C x 30pcs
Part #10 x 2pcs
Hardware #D x 6pcs
#7
#C
#C
#9
#10
#10
#I
#D
#J
Hardware #J x 6pcs
Align center support (#9) to the
upper end guardrails (#2),
then secure by using screws
(#C).
Align slat kit (#7) to the upper
bunk, then secure by using
screws (#C).
Align guardrails supports (#10) to
the guardrails and upper side rails,
then secure by using bolts (#D)
with hex cap (#J)

ASSEMBLY INSTRUCTIONS
7
8
12 / 14
Hardware #E x 8pcs
Hardware #G x 4pcs
Part #11 x 4pcs
Part #12 x 1pc
Part #13 x 1pc
#G
#E
#13
#12
#11
#H
#E
#E
#E
#E
#E
#E
#E
#G
#G
Insert metal dowels (#G) to the
lower bunk, then align upper bunk
to lower bunk.
Align ladder steps (#11) to the
ladder rails (#12,13), then secure
by using screws (#E).

9
10
Hardware #H x 2pcs
ASSEMBLY INSTRUCTIONS
13 / 14
#H
Align ladder to the upper bunk,
then secure by using screws (#H).

14/ 14