Furniture of America CM-DK934 User manual

MODEL #
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
CM-DK934
VERSION # 22-03-14
1 / 11

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 11

4 / XXXXX11

#1 1pc #2 1pc #3 1pc
#4 1pc #5 1pc
Top Panel
Right box
VANITY SET
CM-DK934
Left bottom cabinet Right bottom cabinet
Back Panel
#A 4pcs #B 12pcs #C 12pcs
#D 12pcs #E 1pc #F 8pcs
Lock washer Ø1/4''
Flat Washer
Ø5/16'' x 19mm
Allen Wrench 4mm
Bolt Ø1/4'' x 1-3/16'' Bolt Ø1/4'' x 1-3/8''
Wood Dowel Ø8 x 20mm
5 / 11

Anti-tip Skit
#1
#3
#2
#5
#4
#G 1set
6 / 11

CM-DK934 is packed in 2 cases
Carton Disignation Part Hardware
#A x 4pcs
#B x 12pcs
#C x 12pcs
#1
#4
#2
CM-DK934-1
#5
#D x 12pcs
#E x 1pc
#G x 1set
#3
Top Panel
Back Panel
Left bottom
cabinet
Right bottom
cabinet
Right box
CM-DK934-2
#F x 4pcs
7 / 11

Part #2 x1pc
ASSEMBLY INSTRUCTIONS
1
2
8 / 11
#E
#B
#D #C
#2
#3
#4
Part #3 x1pc
Part #4 x1pc
Hardware #B x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
#3
#2
Hardware #F x4pcs
#F
Smoking box
Sucker
Insert Dowels (#F) into Back Panel (#4).
Align the Back Panel (#4) to the Left/Right
Bottom Cabinets (#2,3) and secure in place
by using Bolts (#B) with Washers (#C,D).
Remove the drawers from the side
cabinets. Remove the knobs form
within each drawer and attach it to
the front.

Part #1 x1pc
ASSEMBLY INSTRUCTIONS
3
4
9 / 11
Hardware #B x8pcs
Hardware #C x8pcs
Hardware #D x8pcs
#1 #F
#B
#C
#D
#E
Hardware #F x4pcs
Part #5 x1pc
Hardware #A x4pcs
#E
#A
#3
#2
#5
1. Attach the Right Box (#5)
to the Right Bottom Cabinet
(#3) by using Bolts (#A).
2. Remove knob from
within the drawer and
attach tot the front.
Align the Top panel (#1) to the
desk using dowels (#F). Then
secure into place using Bolts (#B)
with Washers (#C,D).

ASSEMBLY INSTRUCTIONS
5
6
10 / 11
Hardware #G x1set
WALL
#G