Furniture of America CM4346E User manual

CM4346E
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 7
TOOLS REQUIRED
2 - Persons
Recommended
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
VERSION # 19 -12-0 5

2 / 7
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

PRE ASSEMBLY
INTRODUCTION
3 / 7
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.

4 / 7

END TABLE
16pcs
JCBC BOLT
M6 x 35mm
#A
1pc
ALLEN WRENCH
#E
CM4346E
1pc
TABLE TOP
#1 2pcs
MOUNTING PLATE
#2 2pcs
TABLE LEG
#3
1pc
#4
CROSS BAR
4pcs
#D
WOOD DOWEL
M8 x 35mm
2pcs
#5
STOPPER
18pcs
M6 SPRING WASHER
#C
2pcs
JCBC BOLT
M6 x 60mm
#B
5 / 7
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.

1
2
Part #2 x 2pcs
Part #3 x 2pcs
Hardware #A x 8pcs
Hardware #C x 8pcs #2
#3
#3
#2
#E
#C
#A
Part #4 x 1pc
Hardware #B x 2pcs
Hardware #C x 2pcs
Hardware #D x 4pcs
#4
#3
#E
#4
#2
#D
#B
#C
#3
#2
6 / 7
x 2
Align mounting plate (#2) to the
legs (#3), then secure by using
bolts (#A) with washers (#C).
Attach dowels (#D) to the ends of
the cross bar (#4), then align legs
(#3) to the cross bar (#4). Secure by
using bolts (#B) with washers (#C).

3
4
#5
#5
#1
#3
#E
#1
#2
#A
#2
#4
#C
Part #1 x 1pc
Part #5 x 2pcs
Hardware #A x 8pcs
Hardware #C x 8pcs
7 / 7
1) Align mounting plate (#2) to the top
(#1), then secure by using bolts (#A)
with washers (#C).
2) Attach stopper (#5) to
the side of the legs.