Furniture of America CM-DK933 User manual

1 / 11
MODEL #
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
CM-DK933
CM-DK933-1
CM-DK933
CM-DK933-1
(NOT INCLUDE CABINET)
VERSION # 22-03-14

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 11

4 / 11

#1 1pc #2 1pc #3 1pc
#4 1pc #5 2pcs
Table top
VANITY SET
5 / 11
CM-DK933
Left side panel Right side panel
Back panel
#C 8pcs
#A 8pcs #B 1pc
#D 4pcs #E 4pcs #F 1set
Anti-tip Skit
Allen Wrench 4mm
Bolt Ø1/4'' x 1-3/16'' Wood Dowel
Ø8 x 30mm
Cam Bolt
7.5 x 35mm
Cam Lock
Ø15 x 12mm
Bottom cabinet
CM-DK933-1

#1
#2
#3
#4
6 / 11
#5
#5
Exploded View

CM-DK933 is packed in 2 cases
7 / 11
Carton Disignation Part Hardware
#A x 8pcs
#B x 1pc
#C x 8pcs
#1
#2
#4
CM-DK933-1
#3
#D x 4pcs
#E x 4pcs
Table top
Left side panel
Right side panel
Backplane
#F x 1set
CM-DK933-2 Bottom cabinet
(2pcs) #5

Part #2 x1pc
ASSEMBLY INSTRUCTIONS
1
2
8 / 11
Part #3 x1pc
Part #1 x1pc
#3
#2
#D
Hardware #D x4pcs
#1
Smoking box
Sucker
Prepare Side Panels
(#2,#3) by attaching
cam bolts (#D).
Remove the drawers from Table
Top (#1). Remove handles form
within each drawer and attach to
the from of the front of the drawer
using the screws provided.

Part #5 x2pcs
ASSEMBLY INSTRUCTIONS
4
9 / 11
#5
#5
Hardware #C x8pcs
Part #4 x1pc
Hardware #E x4pcs
3
#1
#4
#2
#3
#A
#B
#C
#1
#4
#3 #2
#E
#C
#B
Hardware #A x8pcs
Insert Dowels (#C) into Side Panels
(#2,#3. Then align the panels onto the
Table Top (#1).Secure using Bolts (#A).
Align Back Panel (#4) to the side
panels (#2,#3) and secures using
cam connectors (#B).
Insert drawers into the table top. If
you have version with additional
cabinets, remove handles from
within the drawers and place them in
front panels.

ASSEMBLY INSTRUCTIONS
5
10 / 11
WALL
#F
WALL
#F
#5
#5
CM-DK933-1
CM-DK933