Furniture of America CM1745 User manual

1 / 16
MODEL #
CM1745
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 19-12-24
2 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 16

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 16

4 / 16

DAYBED
CM1745
5 / 16
#1 1pc #2 1pc #3 1pc
#5 2pcs #6 1pc #7 3pcs
#4 1pc
#8 1pc
#9 1set #10 1set #11 1pc #12 1pc
#13 2pcs #14 2pcs #15 2pcs #16 2pcs
Left Headboard Right Headboard Back Side Rail Front Side Rail
Back Guardrail Guardrail Flap
Twin Slats Kit
(9pcs)
Trundle Back
Rail
Left Board
Flap
Trundle Front
Frame
Twin Slats Kit
(10pcs)
Front Board
Drawer Runner
Trundle Side
Panel (L&R)

#A 12pcs #B 12pcs #C 11pcs #D 3pcs
#E 4pcs #F 8pcs #G 6pcs
Right Board
6 / 16
#17 2pcs #18 2pcs
Back Board Bottom Board
#H 42pcs
#I 16pcs #J 8pcs #K 2pcs #L 4pcs
#M 4pcs #N 2pcs
Bolt
Ø1/4" x 3-1/8"
Barrel Nut
Ø1/4" x 1/2"
Bolt
Ø1/4" x 1-3/16"
Wood Dowel
Ø10x40mm
Screw
#3 x 15mm
Screw
#3 x 12mm
Wheel Scroll Bar
#19 2pcs
#O 1pc
Allen Wrench 4mm
Hex Cap
Ø1/4" x 5/8"
Wood Dowel
Ø6x30mm
Screw
#4 x 40mm
Screw
#4 x 30mm
Screw
#4 x 20mm
Screw
#4 x 25mm

7 / 16
Exploded View
#1
#2
#3
#4
#5
#6
#9
#7
#8
#10
#11
#12
#13
#13
#14
#15,#16,#17,#18,#19

ASSEMBLY INSTRUCTIONS
1
2
8 / 16
Part #1 x1pc
Part #2 x1pc
Hardware #A x12pcs
Hardware #B x12pcs
Hardware #E x4pcs
Hardware #C x3pcs
Part #3 x1pc
Part #4 x1pc
Part #5 x2pcs
Part #6 x1pc
Hardware #D x3pcs
#1
#2
#3
#4
#5
#O
#O
#B
#B
#A
#B
#A
#C
#D
#O
#6
#3
#E
Align side rail (#4) to the
headboards (#1,2), then
secure by using bolts (#A)
onto barrel nuts (#B).
Insert dowels (#E) to guardrails
(#5), then align guardrails (#5)
and side rails (#3) to the
headboards (#1,2). Secure by
using bolts (#A) with barrel nuts
(#B).
Align guardrail (#6) to the side rails
(#3), then secure by using bolts
(#C) to hex cap (#D).

ASSEMBLY INSTRUCTIONS
3
4
9 / 16
Part #7 x3pcs
Hardware #G x6pcs
Part #8 x1pc
#1
#2
#8
#8
#G
#7
#3
#4
Align flaps (#7) to the side rails (#3,4),
then secure by using screws (#G).
Align flap (#8) to the bed.

ASSEMBLY INSTRUCTIONS
5
6
10 / 16
Hardware #C x8pcs
#11
#12
#13
#13
Part #13 x2pcs
#11
#12
Hardware #J x8pcs
Hardware #M x4pcs
Part #11 x1pc
Part #12 x1pc #M
#J
#O
#C
Align wheels (#M) to the bottom of the
trundle frame and rail (#11,12).
Secure by using screws (#J).
Align trundle sides (#13) to the trundle frame
and rail (#11,12), then secure by using screws
(#C).