Furniture of America CM7420 User manual

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX11

4 / XXXXXXX11

Align HB panel (#6) to HB posts (#1,2),
then secure by using bolts (#A).
Align headboard (#5) to the
posts (#1,2), then secure by
using bolts (#D,E) and screws
(#F) with washers (#H) as
shown in the diagram.

Align footboard panel (#7) to the
FB posts (#3,4), then secure by
using bolts (#C).
Align side rails (#8,9) to each other,
then secure by using bolts (#A) with
washers (#G).

#9
Align side rails to the headboard and
footboard, then secure by using bolts
(#B) with washers (#G).
Align support legs (#13) to the
slats (#10,11), then secure by
using bolts (#D) with washers
(#G).

Align slats (#10,11) to the side rails,
(#8,9), then secure by using bolts (#A)
with washers (#G).
Insert finials (#12) to the
headboard and footboard.