Furniture of America CM3712PT-5PK User manual

1 / 9
MODEL #
CM3712PT-5PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
VERSION # 20-07-30

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

Table Top Table Leg Chair Seat Backrest Front Left Leg
Front Right Leg Front Stretcher Left Stretcher Right Stretcher
Bolt Ø5/16" x 3-1/4''
Lock Washer Ø5/16" Flat Washer Ø5/16"
Screw #8 x 38mm
Allen Wrench M4
Bolt Ø5/16" x 2-1/4'' Bolt Ø5/16" x 1-1/2''
HEIGHT TABLE SETS
CM3712PT-5PK
#1 1pc #2 4pcs #3 4pcs
#A 16pcs #B 24pcs #C 8pcs
5 / 9
#4 4pcs #5 4pcs
#6 4pcs #7 4pcs #8 4pcs #9 4pcs
#D 24pcs
#E 48pcs #F 48pcs #G 1pc

#1
#2
#4
#3
#8
#5
#7
#6
#9
x 4
#2
#1
#B
#E
#F
#G
1
2
Part #1 x1pc
Part #3 x4pcs
Hardware #B x8pcs
Hardware #E x8pcs
Hardware #F x8pcs
6 / 9
ASSEMBLY INSTRUCTIONS
Align table legs (#2) to the table (#1), then secure by
using bolts (#B) with washers (#E,F).

#4
#3 #C
#G
#E
#F
#G #A #E
#F
x 4
x 4
3
4
7 / 9
ASSEMBLY INSTRUCTIONS
Part #3 x4pcs
Part #4 x4pcs
Hardware #C x8pcs
Hardware #E x8pcs
Hardware #F x8pcs
Hardware #A x16pcs
Hardware #E x16pcs
Hardware #F x16pcs
Align seat (#3) to the chair back (#4), then secure by
using bolts (#C) with washers (#E,F).
Secure corner holes of the seat (#3) to chair back (#4), then
secure by using bolts (#A) with washers (#E,F).

#9
#8
#7
#5 #6
x 4
x 4
5
6
8 / 9
ASSEMBLY INSTRUCTIONS
Part #8 x4pcs
Part #9 x4pcs
Part #5 x4pcs
Part #6 x4pcs
Part #7 x4pcs
#6
#5
Align stretchers (#8,9) to chair back (#4) as shown in the diagram.
Align front stretcher (#7) to the front legs (#5,6)
as shown in the diagram.
Align front legs (#5,6) to seat (#3), while have
stretchers (#8,9) connect to front legs (#5,6).

x 4
x 4
7
8
9 / 9
ASSEMBLY INSTRUCTIONS
#D
Hardware #D x24pcs
#F #E #B #G
Hardware #B x16pcs
Hardware #E x16pcs
Hardware #F x16pcs
Secure stretchers (#7,8,9) by using screws (#D).
Secure front legs (#5,6) to seat (#3) by using bolts (#B)
with washers (#E,F).