Furniture of America CM4056C User manual

For more information contact our team: [email protected]

1) Align top wood (#4) to the holes
of the top glass (#1), then secure by
using bolts (#E) with washers (#F).
2) Align and attach rods (#C)
to the holes of the glass (#1),
then place long support tubes
(#7) with plastic washers (#I)
over rods (#C).

1) Attach rods (#D) and dowels (#H) to
the holes of the top wood (#4).
2) Align middle shelf (#3) to the rods, then secure
by using hex nut (#G) with washers (#F).
3) Align and attach rods (#B) to the holes of the middle shelf (#3),
then place short support tube (#8) with plastics washer (#I) over
rods (#B).
1,2) Slide big side panel (#6) through the rods (#D).
3) Attach rods (#A) and dowels (#H) to the holes
of the middle shelf (#3).

Slide small side panel (#5) through the rods (#A).
Attach dowels (#H) to the holes of the side panels (#5,6), then align bottom panel (#2) to the rods
and dowels of the unit. Secure by using hex nut (#G) with washers (#F).