Furniture of America Davida CM7897Q User manual

MODEL #
CM7897Q
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
VERSION # 20-06-01
EASY DIFFICULT
1 / 10
Recommended
3 - People

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X10

4 / XXXXX10

Footboard
#E 1pc
Allen Wrench 5mm
#D 32pcs
Screw #8 x 38mm
#5 1set
BED
CM7897Q
#1 1pc
Headboard
#2 1pc #3 2pcs #4 4pcs
Support Leg
195x30x30mm
#6 1pc
#A 8pcs
Bolt Ø5/16" x 2-1/2"
Side Rail
Slat（13pcs）Support Rail
#B 8pcs
Lock Washer Ø5/16"
#C 8pcs
Flat Washer Ø5/16" x 22mm
#7 6pcs
Plastic Feet
5 / 10

Carton Disignation Part Hardware
Headboard
CM7897-Q is packed in 3 cases
Support leg
#E x 1pc
Side Rail
Support Rail
Footboard
Slat（13pcs）
Plastic Feet
#1
#3
#6
#2
#4
#5
#7
#A x 8pcs
#Bx 8pcs
#Cx 8pcs
#D x 32pcs
CM7897Q-FB
CM7897Q-R
CM7897Q-HB
6/ 10

Exploded View
#1
#2
#3 #6
#4
#5
#7
7/10

Part #1 x1pc
Part #2 x1pc
Hardware #A x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
Part #3 x2pcs
#E
#A
#B
#C
#1
#3 #2
#3
ASSEMBLY INSTRUCTIONS
1
Part #2 x1pc
Part #7 x6pcs
Hardware #D x6pcs #D
#7
#2
2
8/10
Align side rails (#3) to headboard (#1) and
footboard (#2), then secure by using bolts
(#A) with washers (#B,C).
Align plastic feet (#7) to the footboard
(#2), then secure by using screws (#D).
There may not be pre-drilled holes.

ASSEMBLY INSTRUCTIONS
3
#4
#6
#5
4
Part #4 x4pcs
Part #5 x1set
Part #6 x1pc
#D
Hardware #D x26pcs
9/ 10
Align center slat (#6) to the slat kit (#5),
then secure by using support legs
(#4).
Align slats to the side rails, then
secure by using screws (#D).

ASSEMBLY INSTRUCTIONS
5
6
10 / 10