Furniture of America CM7568Q/EK User manual

1 / 9
MODEL #
CM7568Q/EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
ASSEMBLY RATING
VERSION # 20-06-22

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4/ XXXXXXX9

Headboard Leg
(L&R)
Allen Key4mm
Headboard
Side Rail Bed Slat (13pcs)
Short Support Leg
115 x30x30mm
Footboard FbSupport Leg
164x30x30mm
Screw #8 x 32mm
Center Slat
Long Support Leg
362x30x30mm
FB LegØ110x84m m
Bolt Ø5/16" x 2"Lock Washer Ø5/16" Flat Washer Ø5/16"
1 / 9
MODEL #
CM7568Q/EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-09
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
BED
CM7568Q/EK
#A 6pcs
5 / 9
#4 2pcs
#6 2pcs
#5 2pcs
Ø1/4"
#7 1pc #8 1pc #9 1pc #10 3pcs
Ø1/4" Ø1/4"
Bolt Ø1/4" x 1"
Lock Washer Ø1/4" Flat Washer Ø1/4"
#E 2pcs #F 2pcs #G 1pc #H 26pcs
HARDWARE
#B 6pcs #C 6pcs #D 2pcs

CM7568Q/EK is packedin 3 cases
Carton Disignation Part Hardware
Headboard
CM7568Q/EK-HB
#A 6pcs
#B 6pcs
#C 6pcs
#D 2pcs
#E 2pcs
#F 2pcs
#G 1pc
#H 26pcs
Headboard Leg(L&R)
Footboard
Footboard
Leg
Footboard
Support Leg
CM7568Q/EK-FB
Bed Slat
Side Rail
CM7568Q/EK-R Center Slat
Short Support Leg
Long Support Leg
Top Side Rail
#1
#2
#3
#4
#5
#7
#6
#8
#9
#10
#11
6 / 9
CM7568CK is packedin 3 cases
Carton Disignation Part Hardware
Headboard
CM7568CK-HB
#A 6pcs
#B 6pcs
#C 6pcs
#D 2pcs
#E 2pcs
#F 2pcs
#G 1pc
#H 26pcs
Headboard Leg(L&R)
Footboard
Footboard
Leg
Footboard
Support Leg
CM7568CK-FB
Bed Slat
Side Rail
CM7568CK-R
Center Slat
Short Support Leg
Long Support Leg
#1
#2
#3
#4
#5
#7
#6
#8
#9
#10
6 / 10
#J 10pcs

Headboard Leg
(L&R)
Allen Key
4mm
Headboard
Side Rail Bed Slat (13pcs)
Short Support Leg
115 x30x30mm
Footboard FbSupport Leg
164x30x30mm
Screw #8 x 32mm
Center Slat
Long Support Leg
362x30x30mm
#6
#5
#7
#9
#10 #8
#1
#2L
#2R
#3
Ø1/4"
FB LegØ110x84m m
#4
#A#B#C
#G
#2R
#2L
#1
CM7568Q/EK is packedin 3 cases
Carton Disignation Part Hardware
Headboard
CM7568Q/EK-HB
#A 6pcs
#B 6pcs
#C 6pcs
#D 2pcs
#E 2pcs
#F 2pcs
#G 1pc
#H 26pcs
Headboard Leg(L&R)
Footboard
Footboard
Leg
Footboard
Support
Leg
CM7568Q/EK-FB
Bed Slat
Side Rail
CM7568Q/EK-R Center Slat
Short Support Leg
Long Support Leg
#1
#2
#3
#4
#5
#7
#6
#8
#9
#10
Bolt Ø5/16" x 2"Lock Washer Ø5/16" Flat Washer Ø5/16"
6 / 9
1 / 9
MODEL #
CM7568Q/EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-09
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
1
2
7 / 9
BED
CM7568Q/EK
#1 1pc #2 2pcs
#A 6pcs
5 / 9
ASSEMBLYINSTRUCTIONS
Hardware
#A x 6pcs
#3 1pc #4 2pcs
#6 2pcs
#B 6pcs #C 6pcs #D 2pcs
Hardware
#B x 6pcs
Hardware
#C x 6pcs
Part#2 x2pcs
Part#1 x1pc
#5 2pcs
Ø1/4"
#7 1pc #8 1pc #9 1pc #10 3pcs
Ø1/4" Ø1/4"
Bolt Ø1/4" x 1"
Lock Washer Ø1/4" Flat Washer Ø1/4"
#E 2pcs #F 2pcs #G 1pc #H 26pcs
Align HB legs (#2R/L) to the headboard (#1), then
secure by using bolts (#A) with washers (#B,C).

Headboard Leg
(L&R)
Allen Key
4mm
Headboard
Side Rail Bed Slat (13pcs)
Short Support Leg
115 x30x30mm
Footboard FbSupport Leg
164x30x30mm
Screw #8 x 32mm
Center Slat
Long Support Leg
362x30x30mm
#6
#5
#7
#9
#10 #8
#1
#2L
#2R
#3
Ø1/4"
FB LegØ110x84m m
#4
#A#B#C
#G
#2R
#2L
#1
#5
#6
#6
#3
#4
CM7568Q/EK is packedin 3 cases
Carton Disignation Part Hardware
Headboard
CM7568Q/EK-HB
#A 6pcs
#B 6pcs
#C 6pcs
#D 2pcs
#E 2pcs
#F 2pcs
#G 1pc
#H 26pcs
Headboard Leg(L&R)
Footboard
Footboard
Leg
Footboard
Support
Leg
CM7568Q/EK-FB
Bed Slat
Side Rail
CM7568Q/EK-R Center Slat
Short Support Leg
Long Support Leg
#1
#2
#3
#4
#5
#7
#6
#8
#9
#10
Bolt Ø5/16" x 2"Lock Washer Ø5/16" Flat Washer Ø5/16"
6 / 9
1 / 9
MODEL #
CM7568Q/EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-09
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
1
2
7 / 9
3
4
8 / 9
BED
CM7568Q/EK
#1 1pc #2 2pcs
#A 6pcs
5 / 9
ASSEMBLYINSTRUCTIONS
ASSEMBLYINSTRUCTIONS
Hardware
#A x 6pcs
#3 1pc #4 2pcs
#6 2pcs
#B 6pcs #C 6pcs #D 2pcs
Hardware
#B x 6pcs
Hardware
#C x 6pcs
Part#2 x2pcs
Part#1 x1pc
#5 2pcs
Ø1/4"
#7 1pc #8 1pc #9 1pc #10 3pcs
Ø1/4" Ø1/4"
Bolt Ø1/4" x 1"
Lock Washer Ø1/4" Flat Washer Ø1/4"
#E 2pcs #F 2pcs #G 1pc #H 26pcs
Part#4 x2pcs
Part#3 x1pc
Part#5 x2pcs
Part#6 x2pcs
Attach FB legs (#4) to the footboard (#3), then attach
support leg (#5) to footboard (#3).
Align and hook the side rails (#5) to the headboard (#1) and
footboard (#3). Make sure it is firmly in place.

Headboard Leg
(L&R)
Allen Key
4mm
Headboard
Side Rail Bed Slat (13pcs)
Short Support Leg
115 x30x30mm
Footboard FbSupport Leg
164x30x30mm
Screw #8 x 32mm
Center Slat
Long Support Leg
362x30x30mm
#6
#5
#7
#9
#10 #8
Adjust leveler
#1
#2L
#2R
#3
Ø1/4"
FB LegØ110x84m m
#4
#A#B#C
#G
#2R
#2L
#1
#5
#6
#6
#9
#10
#8
#3
#H
#D
#E
#F
#G
#9
#10
#8
#5
#5
#7
#4
CM7568Q/EK is packedin 3 cases
Carton Disignation Part Hardware
Headboard
CM7568Q/EK-HB
#A 6pcs
#B 6pcs
#C 6pcs
#D 2pcs
#E 2pcs
#F 2pcs
#G 1pc
#H 26pcs
Headboard Leg(L&R)
Footboard
Footboard
Leg
Footboard
Support
Leg
CM7568Q/EK-FB
Bed Slat
Side Rail
CM7568Q/EK-R Center Slat
Short Support Leg
Long Support Leg
#1
#2
#3
#4
#5
#7
#6
#8
#9
#10
Bolt Ø5/16" x 2"Lock Washer Ø5/16" Flat Washer Ø5/16"
6 / 9
1 / 9
MODEL #
CM7568Q/EK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 20-06-09
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
1
2
7 / 9
3
4
8 / 9
BED
CM7568Q/EK
#1 1pc #2 2pcs
#A 6pcs
5 / 9
ASSEMBLYINSTRUCTIONS ASSEMBLYINSTRUCTIONS
Hardware
#A x 6pcs
#3 1pc #4 2pcs
#6 2pcs
#B 6pcs #C 6pcs #D 2pcs
Hardware
#B x 6pcs
Hardware
#C x 6pcs
Part#2 x2pcs
Part#1 x1pc
#5 2pcs
Ø1/4"
#7 1pc #8 1pc #9 1pc #10 3pcs
Ø1/4" Ø1/4"
Bolt Ø1/4" x 1"
Lock Washer Ø1/4" Flat Washer Ø1/4"
#E 2pcs #F 2pcs #G 1pc #H 26pcs
5
6
9 / 9
ASSEMBLYINSTRUCTIONS
Part#4 x2pcs
Part#3 x1pc
Part#5 x2pcs
Part#6 x2pcs
Part#9 x1pc
Part#8 x1pc
Part#10 x3pcs
Hardware
#D x 2pcs
Hardware
#E x 2pcs
Hardware
#F x 2pcs
Hardware
#H x 26pcs
Attach support legs (#9,10) to the center support rail (#8), then adjust
leveler of the support legs (#10) according to ground level.
Align slats (#7) to side rails, then secure by using screws (#H).
Align center slat (#8)
to the slats (#7), then
secure by using
bolts (#D) with
washers (#E,F)