Furniture of America Olga CM-BK913 User manual

1. Align the front and rear guardrail (#3,4) to the holes
along the front and rear end frames (#1,2). Insert 3 bolts
(#C) into each side. Secure using the Allen wrench (#D).
2. Align the ends of the front and rear rails (#5,6)
to the holes along the bottom of the front and
rear end frames (#1,2). Insert 2 bolts (#C) into
each end and secure using the Allen wrench (#D).
Align the ladder (#9) to the holes along
the front guardrail (#4) and front rail (#6),
then insert a bolt (#B) into each end from
within. Secure using the Allen wrench (#D).

Align the outer frames (#7) to the
outer sides of the top and bottom bed,
and align the inner frames (#8) to the
holes along the center of the beds.
Insert a bolt (#A) into each hole and
secure using the Allen wrench (#D).
ASSEMBLY IS COMPLETED