Furniture of America CM6156 User manual

3. Place the seat cushions (#5) and pillows (#7).
1. Insert the middle
leg (#11) with a
plastic washer (#A)
into the center
bottom hole of
the seat (#1).
2. Align the casters (#10)
to the holes along the
bottom corners of the
seat (#1), then insert a
bolt (#B) with flat washer
(#C) into the holes along
each caster. Secure.

Align the casters (#10) to the holes along
the bottom corners of the seat (#2), then
insert a bolt (#B) with flat washer (#C) into
the holes along each caster. Secure.
Place the seat cushions (#5) and pillows (#7).

Place the seat cushions (#5) and pillows (#7).
Align the casters (#10) to the holes along
the bottom corners of the seat (#3), then
insert a bolt (#B) with flat washer (#C) into
the holes along each caster. Secure.

Align the casters (#10) to the holes along
the bottom corners of the seat (#4), then
insert a bolt (#B) with flat washer (#C) into
the holes along each caster. Secure.
Place the seat cushions (#5) and pillows (#7).

Align the brackets along the sides of the seats, then slide until fully secured.