Furniture of America CM6973-CH User manual

TOOLS REQUIRED
ASSEMBLY RATING
Furniture
of
America MODEL #
CM6973
-
CH
Questions?
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
2 - Persons
Recommended
EASY DIFFICULT
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
1 / 7

Furniture
of
America
Thank you for your purchase!
FOA Intro
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
Consumer Hotline
Toll-Free 1-888-980-5122
Monday to Friday
8:30AM- 5:30PM (PST)
WEBSITE
www.foagroup.com
E-MAIL
[e-mail]
foagroup
FurnitureOfAmerica
CHECK
BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
2 / 7

PRE ASSEMBLY
INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
3 / 7

ASSEMBLY
AND
CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Position each part correctly
and insert screws or bolts into
their respective holes.
Turn clockwise to tighten and
only tighten when step is
completed or when instructed
to do so.
Use the appropriate hand tools
or power tools for assembly.
Select steps, such as tightening
screws and/or bolts, may require
hand tools to avoid causing
damage during assembly.
Save the instructions and store
any supplied tools for later
maintenance.
After two weeks, check and
tighten any loose hardware and
repeat again every six months
thereafter.
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY LOOSEN
OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO SUPPORT ITS
INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS INJURY.
4 / 7

CM-AC52
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
CM6973
-CH
5 / 7

1
2
Groove on
Cushion
Bracket on
Seat
Connection the line between
backrest and seat frame.
6 / 7
Align and attach the metal brackets of the back
cushion (#2) to the metal brackets of the seat (#1).
Make sure it is firmly in place.
Connect the cords between backrest
and seat frame.

3
7 / 7