Furniture of America CM7880-HB-EK/CK-VN User manual

1 / 8
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
Wrench
(Included)
CM7880-HB-EK/CK
-VN
VERSION # 20-11-03

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 8

4 / 8

Headboard
5 / 8
#1 1pc
Headboard panel
#2 2pcs
Leg
#E 4pcs
Bolt 5/16"X1-1/2" Lock Washer
Wrench
Bolt 5/16" X 2-1/4"
Hex Nut
Flat Washer
#F 1pc
Allen Wrench M5
#G 1pc
#2
#2
#1
#A 8pcs #B 4pcs #C 16pcs #D 16pcs
CM7880-HB-EK/CK-VN

ASSEMBLY INSTRUCTIONS
1
2
6 / 8
#1 x 1pc
Part
#A x 8pcs
Hardware
#C x 8pcs
Hardware
#D x 8pcs
Hardware
#G x 1pc
Hardware
#2 x 2pcs
Part
#1
#2
Open Velcro to remove legs hardware
pack from behind the headboard (#1)
#1
#2
#2
I. Carefully place the headboard panel
(#1) onto a protected surface.
II. Prepare 8 bolt assemblies by inserting a lock
washer (#C) onto the bolt (#A)
then the flat washer (#D) onto that
same bolt (#A), in tha torder.
III. Align the legs (#2) to the pre-drilled holes located
on the headboard (#1). Insert the prepared
bolt assemblies in the thepre-drilled holes and
secure using the Allen wrench (#G).
#D
#C
#A
#G
#D
#C
#A
#G
CK
EK
F
or EK size bed frame
F
or CK size bed frame
EK
CK

ASSEMBLY INSTRUCTIONS
3
4
7 / 8
QF
Adjust headboard Panel height

ASSEMBLY INSTRUCTIONS
5
8 / 8
#B
#C
#D
#D
#C
#E #F
#1
#2
#2
I. Prepare 4 bolt assemblies by inserting a lock
washer (#C) onto the bolt (#B) then the flat
washer (#D) onto that same bolt (#B),in that order.
II. Align the end of the bed frame to the pre-drilled holes along
the front of the legs (#2). Insert the prepared bolt assemblies
from the back. Once inserted, apply the flat washer (#D) then
the lock washer (#C) and the hex nut (#E) in that order onto
the other ends of the bolts. Secure using the wrench (#F).
#B x 4pcs
Hardware
Hardware
Hardware
#F x 1pc
Hardware
#E x 4pcs
Hardware
#C x 8pcs
#D x 8pcs