Furniture of America CM7155T User manual

For more information contact our team: [email protected]

Prepare 2 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts
(#A). Align headboard support (#3) to the holes of the left and right legs (#2).
Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer
(#C) onto bolts (#A). Align headboard legs (#2L,R) to the holes of the
headboard (#1). Secure with bolts (#A).

Hook the side rails (#5) through the latch of the headboard (#1) and footboard (#4).
Make sure the side rails (#5) are firmly attached to the headboard (#1) and footboard
(#4).
Align slats (#6) to the side rails (#5), then
secure with screws (#D).

Attach wood dowels (#F) to the holes at the bottom of the bed,
then place trundle at the bottom of the bed.

For more information contact our team: [email protected]

Prepare 2 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts
(#A). Align headboard support (#3) to the holes of the left and right legs (#2).
Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C)
onto bolts (#A). Align headboard legs (#2L,R) to the holes of the headboard
(#1). Secure with bolts (#A).

Hook the side rails (#5) through the latch of the headboard (#1) and footboard (#4). Make
sure the side rails (#5) are firmly attached to the headboard (#1) and footboard (#4).
Attach support legs (#7) to the holes of the slats (#6). Adjust the adjustable
floor protector according to the ground level.

Align slats (#6) to the side rails (#5), then
secure with screws (#D).
Attach wood dowels (#F) to the holes at the bottom of the bed,
then place trundle at the bottom of the bed.