Furniture of America CM3212RT User manual

Recommended
Allen Wrench
(Included)
2 - People
DIFFICULTEASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
MON-FRI 8:30AM - 5:30PM (PST)
GIVE US CALL: 1-888-980-5122
Questions?
CM3212RT
MODEL #
1 / 8
TOOLS REQUIRED
(Included)
Wrench
ASSEMBLY RATING
VERSION # 20-09-07

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

106.5
#4 #3
#1
Wrench12mm
#F 1pc#E 8pcs
Pedestal
#4 1pc
Leg
#3 4pcs
CM3212RT
Mounting Plate
Table Top
#B 15pcs
Lock Washer Ø5/16" Allen Wrench M4
#D 1pc#C 15pcs
Flat Washer Ø5/16"
Bolt Ø5/16" x 1-1/2"
#A 7pcs
#2 1pc#1 1pc
5 / 8
TABLE
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.
PARTS
HARDWARE
Helix Ø5/16"x12mm

#4
CM3212RT-1
6/ 8
CM3212RT is packed in 2 cartons
Leg(4pcs) #3
Mounting Plate(1pc) #2
Table Top(1pc) #1
CM3212RT-2 Pedestal(1pc)
Carton Disignation Part Hardware
#A x 7pcs
#Bx 15pcs
#Cx 15pcs
#Dx 1pc
#Ex 8pcs
#Fx 1pc

#1 x1pc
Part
#4 x1pc
Part #2 x1pc
Part
2. Align the mounting plate
(#2) to the holes along the
table top (#1) then insert
the bolt assemblies and
secure.
1. Prepare 4 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
#1
#C
#B
#A
#D
1. Prepare 3 bolt assemblies by first
inserting a lock washer (#B) onto
the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
2. Align the mounting
plate (#2) to the holes
along the pedestal (#4)
then insert the bolt
assemblies and secure. #4
#2
#D
#C
#B
#A
#C x4pcs
Hardware
#B x4pcs
Hardware
#A x4pcs
Hardware
2
#C x3pcs
Hardware
#B x3pcs
Hardware
#A x3pcs
Hardware
1ASSEMBLY INSTRUCTIONS
7/ 8

If wobbly, please ensure to level the table with the flooring, and
adjust the bolts gradually until the table does not wobble anymore.
3. Apply a flat washer (#C)
then lock washer (#B)
and helix (#E) onto the
threaded ends. Secure
using the wrench (#F).
1. Insert the threaded ends of the legs (#3)
into the holes along the pedestal (#4).
Adjust Leveler=04
3
CBEF
4
#E x8pcs
Hardware
#C x8pcs
Hardware
#B x8pcs
Hardware
8 / 8
3
ASSEMBLY INSTRUCTIONS