Furniture of America CM7171Q /F User manual

1 /9
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
MODEL #
CM7171Q/F
VERSION # 20-08-06
3 - People
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4/ XXXXXXX9

Screw #8 x 32mm
Bolt Ø5/16" x 1-3/4"
Bun Foot
Ø1/4"
Flat Washer Ø5/16"
Allen Wrench M4
Lock Washer Ø5/16"
BED
#1 1pc #2 2pcs #3 1pc
#A 8pcs #B 8pcs #C 8pcs
5 / 9
#4 1pc
#5 2pcs
#D 6pcs
#E 1pc
#6 3pcs #7 2pcs #8 3pcs
Support Leg
195x30x30mm
Headboard Panel Headboard Leg
(L&R) Cross bar Footboard
Side Rail Bed Slat
CM7171Q/F

#4
#7
#7
#8
#6
#5
#5
#2L
#1
Carton Disignation Part Hardware
Headboard Leg(L&R)
Footboard
Support Leg
Side Rail
#A 8pcs
#B 8pcs
#C 8pcs
#D 6pcs
#E 1pc
Bun Foot
#1
#2
#3
#4
#7
#6
#8
#5
6 / 9
CM7171Q/F is packed in 3 cases
CM7171Q/F-HB
#2R
#3
Cross bar
Headboard Panel
CM7170Q/F-FB
CM7170Q/F-R
Bed Slat

#1
#2L
#2R
#3
#E
#A
#B
#C
#A
#B
#C
#E
#4
#7
#7
1
2
Part #1 x1pc
Part #2 x2pcs
Part #4 x1pc
7 / 9
ASSEMBLY INSTRUCTIONS
Part #3 x1pc
Hardware #A x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
Part #7 x2pcs
2) Align HB legs (#2R/L) to the holes of
the headboard (#1). Secure by using bolts
(#A).
1) Prepare 8 bolts assembly by inserting
lock washer (#B), then flat washer (#C)
onto bolts (#A). Align cross bar (#3) to
the holes of the HB legs (#2R/L). Secure
by using bolts (#A).
Attach bun foot (#7) to the footboard (#4).

X 3
#6 #8
#5
#5
#1
#4
3
4
Part #6 x3pcs
Part #8 x3pcs
Part #5 x2pcs
8 / 9
ASSEMBLY INSTRUCTIONS
Attach support legs (#8) to each slats (#6).
Adjust the adjustable foot of the support
legs (#8) according to ground level.
Align and hook side rails (#5) to the latch of the headboard (#1) and footboard (#4).
Make sure it is firmly in place.

#D
#5
#5
#6
Hardware #D x6pcs
5
6
9 / 9
ASSEMBLY INSTRUCTIONS
Align slats (#6) to the side rails (#5), then
secure by using screws (#D).