Furniture of America CM7552Q User manual

Rev: 18-04-16
For more information contact our team: [email protected]

Prepare 6 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align HB legs (#3R/L) to the holes of the headboard (#1). Secure by using bolts (#A).
1) Loosen the bolts attached to headboard (#1) and footboard (#2), then hook the
side rails (#4) to the loosed bolts on the headboard (#1) and footboard (#2).
2) Tighten the bolts on the headboard (#1) and footboard (#2) to the side rail
hooks (#4).

Align center slat drawer (#5) to the side rails (#4),
then secure by using screws (#K).
Align support leg (#9) to the hole of the center slat drawer (#5), then adjust
leveler of the support leg (#9) according to ground level.

Prepare 2 bolts assembly by inserting lock
washer (#G), then flat washer (#H) onto
bolts (#E). Align drawer support rail (#10)
to the holes of the footboard (#2) and
center slat (#5). Secure drawer rail (#10)
to center slat (#5) by using bolts (#E),
then secure drawer rail (#10) to footboard
(#2) by using screws (#K).
Unscrew knobs on the inside, then secure knobs to
the outside of the drawers (#12).

Align slat support (#8) to the hole of the bed
slat without marking (#6). Secure by using
bolts (#F).
Align slat support (#8) to the holes of the bed
slat with marking (#7). Secure by using bolts
(#F).
Align slats (#6,7) to the side rails (#4).

Secure slats (#6,7) by using screws (#K).
Align concealed panel (#11) to the slats (#6,7). Secure by using screws (#L).
Please see diagram in steps 10.

ASSEMBLY COMPLETED

Rev: 18-04-16
For more information contact our team: [email protected]