Furniture of America CM7159T User manual

Prepare 8 bolts assembly by inserting washer (#G) onto bolts (#F). Align headboard
legs (#2R/L) to the holes of the headboard (#1). Secure by using bolts (#F).

Attach dowels (#A) and threaded pins (#B) to the holes of the headboard (#1) and footboard (#3). Align side
rails (#4) to the dowels (#A) and threaded pins (#B) of the headboard (#1) and footboard (#3). Secure by using
half moon washer (#C) and hex nut (#D).
Align slats (#5) to the side rails (#4), then secure by using screws (#E).

Prepare 8 bolts assembly by inserting washer (#G) onto bolts
(#F). Align headboard legs (#2R/L) to the holes of the
headboard (#1). Secure by using bolts (#F).

Attach dowels (#A) and threaded pins (#B) to the
holes of the headboard (#1) and footboard (#3).
Align side rails (#4) to the dowels (#A) and
threaded pins (#B) of the headboard (#1) and
footboard (#3). Secure by using half moon washer
(#C) and hex nut (#D).
Attach support legs (#6) to the slat kit (#5). Adjust leveler on the
support legs (#6) according to ground level.

Align slats (#5) to the side rails (#4), then secure by using screws (#E).

Align casters (#D) to the holes of the left and right side panels (#3).
Secure by using screws (#C).
Attach dowels (#A) to each ends of the left and right side panels (#3). Align and attach left and right side panels
(#3) to the dowel holes of the front panel (#1) and back panel (#2). Secure by using bolts (#B).

Align slats (#5) to the front and back panels (#1,2). Secure by using screws (#G).
1) Align knobs (#F) to the
holes of the front panel.
Secure by using bolts (#E)
from the inside.
2) Align bottom panel (#4) to the rest of the trundle.
Secure by using screws (#G).