Furniture of America CM1747 User manual

1 / 12
MODEL #
CM1747
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-01-03
Phillips
Screwdriver
(Not Included)
Recommended
2 - People

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 12

4/ 12

DAY BED
Arm(L&R) Top Back Panel Top Side Rails Bottom Front Panel
Bottom
Back Panel Bottom
Side Panels Top Slat
(13pcs)
Bolt Ø5/16" x 1-1/2"
#1 2pcs #2 1pc #3 2pcs
#5 1pc #6 2pcs #7 1Set
#4 1pc
#A 8pcs #B 4pcs #C 8pcs
Bottom Slat
(12pcs)
Top Center
Support Rail Bottom Center Support Rail Plastic feet
Bolt Ø5/16" x 2-1/2" Bolt Ø5/16"x3/4"
#8 1Set
#9 1pc #10 1pc #11 4pcs
CM1747
5/ 12

Spring Washer
Ø5/16"
#D 20pcs #E 16pcs
Flat Washer
Ø5/16"x19mm
#F 4pcs
Flat Washer
Ø5/16"x22mm
Screw #8 x 32mm
#G 75pcs #H 4pcs
Screw #8 x 50mm
#I 1pc
Allen Key 5mm
#1L
#1R
#2
#3
#3
#9 #5
#10
#6
#4 #6
#7
#8
6/ 12

CM1747 is packed in 2 cases
Carton Disignation Part Hardware
Arm (2pcs)
Plastic feet (4pcs)
#A x 8pcs
#B x 4pcs
#C x 8pcs
#D x 20pcs
#E x 16pcs
#F x 4pcs
#G x 75pcs
CM1747-1
CM1747-2
Top Back Panel
Top Side Rails(2pcs)
Bottom Front Panel
Bottom Back Panel
Bottom Side Panels
(2pcs)
Top Slat (13pcs)
Bottom Slat (12pcs)
Top Center
Support Rail
Bottom Center
Support Rail
#11
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#H x 4pcs
#I x 1pc
7/ 12

1
2
Part #1 x1pc
Hardware #H x2pcs
8 / 12
#11
#1
Part #11 x2pcs
Hardware #A x8pcs
Part #3 x2pcs
Hardware #D x8pcs
Hardware #E x8pcs
ASSEMBLY INSTRUCTIONS
x 2
#H
#1
#11 #H
#1
#3
#3
#E #D #A #I
Align Plastic feet (#11) to the headboard
(#1), then secure by using screws (#H).
Align side rails (#3) to the arms (#1),
then secure by using bolts (#A) with
washers (#D,E).

ASSEMBLY INSTRUCTIONS
Part #2 x1pc
Hardware #B x4pcs
9 / 12
Hardware
Hardware #D x4pcs
#F x4pcs
3
4
Part #9 x1pc
#1
#1
#9
#F #D #B #I
#1
#1
#2
Align and attach support rail (#9) to
arms (#1).
Align back panel (#2) to the arms (#1),
then secure by using bolts (#B) with
washers (#D,F).

ASSEMBLY INSTRUCTIONS
Part #4 x1pc
Part #7 x1set
Part #5 x1pc
10 / 12
5
6
Hardware #G x39pcs
Part #6 x2pcs
Hardware #C x8pcs
Hardware #D x8pcs
Hardware #E x8pcs
#G
#3
#3
#7
#4
#6
#6
#5
#E #D #C #I
Align slats (#7) to the side rails (#3),
then secure by using screws (#G).
Align side panels (#6) to the front and
back panel (#4,5). Secure by using bolts
(#C) with washers (#D,E).

ASSEMBLY INSTRUCTIONS
11 / 12
7
8
Part #10 x1pc
Part #8 x1set
Hardware #G x36pcs
#10
#6
#6
#G
#8
#4
#5
Attach support rail (#10) to the side panels
(#6).
Align slats (#8) to the side panels
(#4,5), then secure by using screws
(#G).

ASSEMBLY INSTRUCTIONS
9
10
12 / 12