Furniture of America FOA7916CK User manual

1 / 8
MODEL #
FOA7916CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 19-11-23
2 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

BED
FOA7916CK
5 / 8
#A 6pcs #B 6pcs
Flat Washer Ø5/16"
#C 6pcs
Bolt Ø5/16" x 1-3/8" Lock Washer Ø5/16"
Allen key M4
#D 1pc #E 8pcs #F 8pcs
Bolt Ø5/16" x 1" Screw #4 x 30mm
#1 1pc #2 2pcs
Footboard
#3 1pc
Headboard Headboard leg(L&R)
#4 2pcs #6 4 pcs
Slat support leg
250 x 30 x 30mm
Slat
#5 8pcs
Siderail
(Ø5/16")

6 / 8
Exploded View
#1
#3
#4
#4
#6
#5
#2L
#2R

ASSEMBLY INSTRUCTIONS
1
7 / 8
2
Part #3 x1pc
Part #4 x2pcs
Hardware #E x8 pcs
Part #1 x1pc
Part #2 x2pcs
Hardware #A x6 pcs
Hardware #B x6 pcs
Hardware #C x6 pcs
#E
#A #B #C
#D
#2R
#2L
#1
#1
#4
#4
#3
Align HB legs (#2R/L) to the
headboard (#1), then secure by
using bolts (#A) with washers
(#B,C).
Attach bolts (#E) half way into
the headboard (#1) and
footboard (#3), then align side
rails (#4) to the bolts (#E).
Secure bolts (#E).

ASSEMBLY INSTRUCTIONS
8 / 8
3
Part #5 x2pcs
Part #6 x1pc
4
Hardware #F x8 pcs
#F
#6
#5
#6
#4
#4
x 4
Attach support legs (#5) to the
slats (#6). Adjust the leveler of the
support legs (#5) according to
ground level.
Align slats (#6) to the side rails (#4), then
secure by using screws (#F).