Furniture of America Neomi CM7127Q-VN User manual

1 / 9
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
VERSION # 20-06-12
CM7127Q-VN

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 9

4/ XXXXXXX9

Bolt Ø5/16"x1-1/2"
Footboard
Headboard Side Rail
Ø5/16"
Slat (13pcs) HB/FB Foot
Lock Washer
Ø5/16" Flat Washer
Ø5/16"
Screw #8 x 38mm
Support Rail
Support Leg
30x30x270mm
Allen Wrench 5mm
Bolt Ø5/16"x2-1/2"
BED
CM7127Q-VN
#1 1pc #2 1pc #3 2pcs
#A 8pcs #B 4pcs #C 12pcs
5 / 9
#4 4pcs
#5 1Set #6 4pcs #7 1pc
#D 12pcs
#E 1pc #F 26pcs

6 / 9
CM7127Q-VN is packed in 3 cases
Carton Disignation Part Hardware
#2
#3
#4
#6
#7
#1 #A x 8pcs
#B x 4pcs
#C x 12pcs
#D x 12pcs
#E x 1pcs
#F x 26pc
CM7127Q-VN
-HB
Headboard
CM7127Q-VN
-FB
CM7127Q-VN
-R
Footboard
Side Rail
Support Leg
HB/FB Foot
Support Rail
#5
Slat (13pcs)

#E
#B
#C
#D
#1
#6
#2
#3
#4
#3
#5
#7
#1
#6
1
2
Part #1 x1pc
Part #6 x2pcs
Hardware #B x2pcs
Hardware #C x2pcs
Hardware #D x2pcs
7 / 9
ASSEMBLY INSTRUCTIONS
Align feet (#6) onto the headboard (#1), then
secure by using bolts (#B) with washers (#C,D).

#E
#A
#C
#D
#1
#2
#3
#3
#E
#B
#C
#D
#2
#6
3
4
Part #2 x1pc
Part #6 x2pcs
Hardware #B x2pcs
Hardware #C x2pcs
Hardware #D x2pcs
Part #3 x2pcs
Hardware #A x8pcs
8 / 9
ASSEMBLY INSTRUCTIONS
Hardware #C x8pcs
Hardware #D x8pcs
Align feet (#6) onto the footboard (#2), then secure by using
bolts (#B) with washers (#C,D).
Align side rails (#3) to the headboard (#1) and
footboard (#2), then secure by using bolts (#A)
with washers (#C,D).

#4
#7
#5
#F
#3
#3
#5
5
6
9 / 9
ASSEMBLY INSTRUCTIONS
Part #4 x4pcs
Part #5 x1Set
Part #7 x1pc
Hardware #F x26pcs
Align center slat (#7) to slats (#5), then secure by using support
legs (#4). Adjust the levelers on the support legs (#4) according to
ground level.
Align slats (#5) to the side rails (#3), then secure
by using screws (#F).