Furniture of America Sunset CM1737 User manual

HARDWARE LIST:
A
B
C
D
E
Wood Screw (30mm) = 48pcs
F
G
H
I
ITEM PARTS LIST:
Side Wall Panel ( Right ) = 1pc
Side Wall Panel ( Left ) = 1pc
Upper Bed Rails = 2pcs
Upper Horizontal Rail = 1pc
Lower Front Panel = 1pc
Lower Back Rail = 1pc
Lower Side Attached Rails = 2pcs
Upper & Lower Bed Slats = 24pcs
STEP #1: ASSEMBLY UPPER BED
Before assembling the two upper bed & horizontal rails,
insert a (M12 x 40mm) dowel into the center hole of each
joint.
Attach the bed slats to the slots using 1 (30mm)
screw on each end.
Connect the upper bed & horizontal rails (3 & 4) with
side wall left & right together. Then using 2 (M6 x 80
mm) bolts and tighten on each rails end. Nut (F) may
need to be adjusted with a screw driver.
UPPER BED
GF0737 DAYBED
ASSEMBLY INSTRUCTION
Bolt (M6 x 80mm) = 12pcs
Nut = 12pcs Dowel (M12 x 50mm) = 6pcs
Allen Key (M4) = 1pc Bolt (M6 x 30mm) = 8pcs
Castor = 6pcs
1 2 3 4
5 6 7 8
G
3 & 4
I(+)
3
8
E
1 & 2 4
I(-)
F
B
A
Screw Driver (+/-)
Not Available
Wood Screw (16mm) = 12pcs

STEP #2: ASSEMBLY LOWER BED
Before assembling the lower bed, Tighten each 3pcs castor with 2 (16mm) screw on the lower front panel & back rail underneath marking holes.
LOWER FRONT PANEL
LOWER BACK RAIL
Attach the bed slats to the slots using 1 (30mm)
screw on each end.
Connect the lower side attached rails with lower front panel & back rail
together. Then tighten 2 (M6 x 30mm) bolts on each end.
LOWER BED
I(+)
6
8
E
5 & 6
7C
A
5
H
DI(+)
6
I(+)
D
H

STEP #3: CONNECTING THE UPPER & LOWER BED
Slide the lower bed underneath the upper bed.
COMPLETED