Furniture of America Raya CM4451A-E User manual

For more information contact our team: [email protected]

To remove the drawer from the cabinet (#3); extend the drawer until you see a black lever on
the rails. As shown in the picture, push the right rail down and push the left rail up, then all
together you can pull out the drawer.
1) Attach rod to the big holes of the side glasses (#1). Insert the rod attached to side glasses (#1) through the holes of
bottom shelf (#4). Insert moon washer (#H) to the rod, then secure with hexnut (#C).
2) Align bottom holes of the side
glasses (#1) to the holes of the
cabinet. Secure with bolts (#A)
that has a flat washer attached to
the bolts (#A).

Align cabinet to the holes of the top panel (#2), then secure with bolts (#L).
Insert the drawer back into the cabinet by aligning the side rails to each other. Push the drawer all the way in until
the rails from the drawer connects through the black lever of the rails connected to the cabinet.

1) Align handle to the holes of the drawer, then secure with bolts (#J)
with flat washer (#K).
2) Insert floor protector (#E) onto the bottom corners of the
side glasses (#1).
Assembly Completed