Furniture of America CM7864Q User manual

1 / 9
MODEL #
CM7864Q
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 19-08-02
2 - Persons
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 9

4 / 9

BED
CM7864Q
#A 16pcs #B 4pcs #C 20pcs
#E 1pc
5 / 9
#1 1pc #2 2pcs #3 1pc #4 1pc
#5 2pcs #6 4pcs #7 4pcs #8 2pcs
Headboard
HB Leg (R&L)
HB Bottom Rail
Footboard
Leg
Slat
Support Leg
35x35x283mm
Ø1/4"
Side Rail
#D 20pcs
#F 8pcs #G 12pcs
Bolt
Ø1/4" x 1-3/4"
Lock Washer
Ø1/4" x 10mm
Flat Washer
Ø1/4" x 13mm
Allen Key M4
Screw
#4 x
30mm
Bolt Ø5/16" x 1"
Bolt
Ø1/4" x 2-1/2"

6 / 9
Exploded View
#1
#2L
#6
#7
#8
#4
#5
#3
#2R

ASSEMBLY INSTRUCTIONS
7 / 9
1
2
Part #1 x1pc
Part #2 x2pcs
Hardware #A x16pcs
Hardware #C x16pcs
Hardware #D x16pcs
#1
#2L
#2R
#3 #D#C #A
#E
#E
#A
#C
#D
Part #3 x1pc
#E
#4
#5
#B
#C
#D
Part #4 x1pc
Part #5 x2pcs
Hardware #B x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
Align HB legs (#2R/L) to the headboard
(#1) and HB support (#3), then secure by
using bolts (#A) with washers (#C,D).
Align legs (#5) to the footboard (#4), then
secure by using bolts (#B) with washers
(#C,D).

ASSEMBLY INSTRUCTIONS
8 / 9
3
4
Part #8 x2pcs
Hardware #G x12pcs #1
#8
#4
#G
#E
x 4
#7
#6
Part #6 x1pc
Part #7 x1pc
Align side rails (#8) to the headboard (#1) and
footboard (#4), then secure by using bolts (#G).
Attach support legs (#7) to the slats (#6).

ASSEMBLY INSTRUCTIONS
9 / 9
5
6
Hardware #F x8pcs
#8
#6
#F
Align slats (#6) to the side rails (#8), then
secure by using screws (#F).