Furniture of America Olga CM-BK913FQ User manual

1) Align the back and front guardrail (#3, #4) to the holes along the upper half of the headboards (#1, #2),
then insert the bolts (#D) into each hole. Secure using the Allen wrench (#E).
2) Align the lower rear and lower front tube (#5, #6) to the holes along the
bottom of the headboards (#1, #2), then insert the bolts (#D) into each hole.
Secure using the Allen wrench (#E).
Align the ladder (#12) to the holes of the lower front tube
(#6) and front guardrail (#4), then insert the bolts (#C) into
each hole. Secure using the Allen wrench (#E).

Align the bed frames (#7, #8, #9, #10) to
the holes indicated, then insert the bolts
(#A) into each hole. Secure using the Allen
wrench (#E).
1) Attach the lower
center tube (#11) to the
headboards (#1, #2),
then insert bolt (#A)
into each hole. Secure
using the Allen wrench
(#E).
2) Insert bolts (#B) to the each holes located at
the bottom center of the tube (#11). Secure
using the Allen wrench (#E).

Align the support legs (#13) to the bottom frames,
then insert the bolts (#A) into the holes from above.
Secure using the Allen wrench (#E).