Furniture of America Winn Park CM7008EK User manual

1 / 10
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
VERSION # 21-02-04
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
CM7008EK/CK VN
3- People
EASY DIFFICULT

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ 10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X10

4 / 10

BED
CM7008EK/CK
5 / 10
#2 1pc
Headboard Panel
#1 1pc #3 2pcs #4 4pcs
#5 1set #6 2pcs #7 8pcs
Bed Slat (12pcs)
Bed Rail
#A 8pcs #B 16pcs
Bolt Ø5/16" x 4" Lock Washer Ø5/16"
#C 16pcs
Flat Washer Ø5/16"
#D 8pcs #E 32pcs
Bolt Ø5/16" x 1-3/16"
#F 1pcs
Footboard Leg
Slat Center Support
Screw #4 x 32mm Allen Wrench M4
VN
Support leg
256x30x30mm
Ø1/4"

6 / 10
Exploded View
#1
#4
#3
#7
#6 #2
#4
#3
#5

7 / 10
Carton Disignation Part Hardware
CM7008EK/CK VN is packed in 2 cases
#1
#2
#4
#3
#5
#6
Headboard Panel
CM7008EK/CK-HB
Footboard
CM7008EK/CK-FBR
Bed Rail
Leg
Bed Slat
Slat Center Support
#7
#E x 32pcs
#B x 16pcs
#C x 16pcs
#F x 1pc
#A x 8pcs
#D x 8pcs
Support leg Ø1/4"
256*30*30MM

8 / 10
ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
#F
#C
#A
#B
#1
#4
#4
Part #1 x1pc
Part #4 x2pcs
Hardware #A x4 pcs
Hardware #B x4 pcs
Hardware #C x4 pcs
#1
Back
#5 x 1set
#4 x 4pcs
#E x 32pcs
#B x 16pcs
#C x 16pcs
#F x 1pc
#A x 8pcs
#D x 8pcs
Align legs (#4) to the headboard (#1), then secure
by using bolts (#A) with washers (#B,C).

9 / 10
ASSEMBLY INSTRUCTIONS
3
4
#1
#3
#3
#2
#D
#B
#C
#F
Part #3 x2pcs
Hardware #D x8 pcs
Hardware #B x8 pcs
Hardware #C x8 pcs
#F
#C
#A
#B
#2
#4
#4
Part #2 x1pc
Part #4 x2pcs
Hardware #A x4 pcs
Hardware #B x4 pcs
Hardware #C x4 pcs
Align legs (#4) to the footboard (#2), then secure
by using bolts (#A) with washers (#B,C).
Align side rails (#3) to the headboard (#1) and footboard (#2), then
secure by using bolts (#D) with washers (#B,C).

ASSEMBLY INSTRUCTIONS
5
6
10 / 10
Part #5 x12pcs
Hardware #E x32 pcs
#7
#6
Part #6 x1pc
Part #7 x4pcs
#E
#3
#5
#6
x 2
Attach support legs (#7) to the slats (#6), then adjust the levelers
on the support legs (#7) according to ground level.
Align slats (#5) to side rails (#3) and center slats (#6),
then secure by using screws (#E).