Furrion FSPK10MWT-BL User manual

100W KICKSTAND SOLAR PANEL WITH
PWM BUNDLE KIT
MODEL: FSPKMWTBL
USER MANUAL
* Product picture for reference only
!!ATTENTION!!
●DO NOT use around open flammable sources.
●DO NOT sit on this product.
●DO NOT hang anything from this product.
●DO NOT setup on elevated surfaces (roofs, tables).
●DO NOT hang from elevated supports (trees, ladders).
●DO NOT setup on un-even surfaces/terrains.
●DO NOT setup or place wiring in any standing water.
●DO NOT place wiring in travel paths (walking, vehicle).
●DO NOT place panel in shaded areas (RV, trees, etc.).
●ONLY use this product as intended, with Furrion products, any modification will
void the warranty.
SETUP AND OPERATION
Face towards sunlight
Overcast? – lay flat facing the sky
Swing support legs
open
Rotate base with sun
movement or leave panel
facing south
NOTE: Ensure panel has stable footing.
CONNECTION
Charge Furrion ePodTM Power Station
Charge Furrion eRoveTM
Charge 12V Battery
10A PWM
Controller
100W Kickstand
Solar Panel
100W Kickstand
Solar Panel
Furrion eRoveTM
Furrion ePodTM
Power Station
Charge Furrion ePod™ Power
Station
Connect solar panel directly to ePower
station DC input (with battery installed
– see ePod power station manual for
charging)
Charge Furrion ePodTM Power Station
Charge Furrion eRoveTM
Charge 12V Battery
10A PWM
Controller
100W Kickstand
Solar Panel
100W Kickstand
Solar Panel
Furrion eRoveTM
Furrion ePodTM
Power Station
Charge Furrion eRove™
Connect solar panel directly to eRove
cooler solar input (with battery installed
– see eRove manual for charging)
Charge Furrion ePodTM Power Station
Charge Furrion eRoveTM
Charge 12V Battery
10A PWM
Controller
100W Kickstand
Solar Panel
100W Kickstand
Solar Panel
Furrion eRoveTM
Furrion ePodTM
Power Station
Charge 12V Battery
1. Connect solar panel directly to 10A
PWM charge controller (provided).
2. Connect controller to Furrion® solar
inlet.
3. Setup controller and charge.
SETUP 10A PWM CHARGE CONTROLLER
10A PWM Charge Controller Status Indicators
LED indicators Indications Status Functions
Charging
Solid on Solar panel has voltage
Solid off Solar panel has no voltage
Slow flashing Charging in process
Quick flashing System over voltage
Battery
Solid on Normal battery function
Solid off Battery is not connected
Slow flashing Battery is under voltage
Quick flashing Battery is over discharged
Content Includes:
●100W Solar Panel
●10A PWM Charge Controller
●User Manual
●Warranty Manual

Battery Type Selection Method
●Press the button for 3 seconds. The LED will begin to flash indicating that the
mode can be changed.
●The LED number will cycle from 1 to 4 when the button is pressed.
●When the desired battery type number appears, wait until the LED stops flashing
or press the button again for 3 seconds to complete the setting.
Numeric
Indicator Battery Type Numeric Indicator Battery Type
1Sealed lead-acid batteries 3Flooded lead-acid batteries
2GEL lead-acid batteries 4Lithium iron phosphate batteries
HANDLING AND ROUTINE MAINTENANCE
●ALWAYS carry product by lifting
handle.
●ALWAYS lock folding legs in position
with turn knob.
●ALWAYS protect glass surface when
handling/storing.
●ALWAYS keep glass clean to
maximize efficiency.
●ALWAYS check wiring and
connector quality.
●ALWAYS maintain batteries as per
manufacturer.
CLEANING INSTRUCTIONS
●ONLY use warm soapy water and
clean cloth.
●NEVER use acidic solutions as it
may frost/damage the glass.
SPECIFICATION
Mechanical Specifications
Solar Cell Type Monocrystalline
Cell Size 6⅛” x 6⅛” (156mm x 156mm)
Product Size 34⁄” x 26⁄” x 1⁄” (870mm x 670mm x 35mm)
Number of Cells 20
Weight 17.6lbs (8.0kg) ± 10%
Cable Length 181⅛” (4.6m)
Type of Connector DC Connector
Junction Box IP65 rated (dust proof, water resistant)
Working Specifications
Power Tolerance -5%, +5%
Operating Temperature -40°F - 185°F (-40°C - 85°C)
Max System Voltage 30V
Max Series Fuse Rating 15A
Normal Operating Cell Temperature 113±3.6°F (45±2°C)
Electrical Specifications ( Standard Testing Conditions=25°C, 1000W/mirradiance and AM=1.5)
Max System Voltage (IEC/UL) 600V
Maximum Power Pmax 100W
Power Tolerance ±5%
Voltage at Maximum Power Point Vmpp 17.0V (±4V)
Current at Maximum Power Point Impp 5.92A (±2A)
Open Circuit Voltage Voc 20.9V (±4V)
Short Circuit Current Isc 6.13A (±2A)
Cell Efficiency (%) 21.0% (±5%)
Module Efficiency (%) 17.15% (±5%)
Temperature Coefficient of Voc -0.08%/°F (-0.30%/°C) per degree above 77°F (25°C)
Temperature Coefficient of Isc +0.02 %/°F (+0.06%/°C) per degree above 77°F (25°C)
Temperature Coefficient of Pmax -0.11 %/°F (-0.41%/°C) per degree above 77°F (25°C)
Furrion Innovation Center & Institute of Technology
●52567 Independence Ct., Elkhart, IN 46514, USA ●Toll free:1-888-354-5792
●Email: [email protected]
©2007-2020 Furrion Ltd. Furrion® and the Furrion logo are trademarks licensed for use by Furrion Ltd.
and registered in the U.S. and other countries.
FURRION.COM
IM-FEN00026 V1.0