Furrion FSBT43S-BL User manual

1
Operating and Installation Instructions
Soundbar Speakers
Furrion FSBT43S-BL
Soundbar Speakers
This manual is for use with

2
Welcome
Furrion FSBT43S-BL Soundbar Speakers
Thanks you for purchasing Furrion FSBT43S-BL soundbar speakers.
Before installation and use, please read all instructions carefully.
This will ensure safe use and reduce the risk of injury.
Contents
IMPORTANT SAFETY INSTRUCTION ...............................................
UNPACKING .......................................................................................
EQUIPMENT YOU WILL NEED ..........................................................
STEPS OF INSTALLATION ................................................................
- Before you make any holes
- Drill a pilot hole for testing the wall space
PREPARE THE WALL FOR INSERTING THE SPEAKER .....................
- Measure and mark the hole to be cut
- Attaching rectangular grille frames
CIRCUIT DIAGRAM ............................................................................
3
4
4
5
6-7
7
®

3
IMPORTANT SAFETY INSTRUCTION
Please read all of the information in this operating manual, including all safety,
shock, or injury to persons, users should follow the directions and warnings in this
manual.
1. Read these instructions for all components before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in the owner’s guide.
4. Follow all instructions.
5. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
6.
SAVE THESE INSTRUCTIONS

4
UNPACKING
EQUIMENT YOU WILL NEED
Carefully unpack the speakers. Check to be sure the carton includes all the parts
shown below. If any part of the speaker pair appears damaged, do not use them.
Notify your Furrion dealer immediately.
Note:
copy the numbers onto your warranty card.
• A carpenter's level is suggested for use when installing the speakers in a wall
•
• Painter’s tape or other tape with light adhesive that will not damage paint
or wallpaper
• Cutting tool- For drywall: a keyhole saw, drywall saw, rotary cutting tool,
or jigsaw
For plaster and lath: a saber saw or a rotary cutting tool
(Figure: 1)
(Figure: 2)
Power Drill
Keyhole Saw
Sharp Pencil
Protective Eyewear
Wire Cutter / Stripper
Screw Driver Tape Measure Painter's Tape

5
STEPS TO INSTALLING
Before you make any holes
Be sure you have read and understand the considerations provided in
“Important Safety Instruction” starting on page 2, so you can proceed with
CAUTION: If you are unsure of your ability to complete this process, contact a
professional installer.
Drill a pilot hole for testing the wall space
Before you make a large cut into the wallboard, check the space by probing
behind the wall or ceiling through a small pilot hole. Time spent now can help
ensure a successful installation.
WARNING: Use eye protection and be sure to observe all safety precautions
while using a drill or cutting tool
Caution against drilling without eye protection
(Figure: 3)

6
1/8" (3.2mm)
PREPARE THE WALL FOR INSERTING THE SPEAKER
Measure and mark the hole to be cut
You need a carpenter’s level, a sharp pencil, and optional tape with the template
to complete this step.
1. Position the template carefully over the pilot hole where you want to install
one speaker.
2. Make sure the template is level (Figure 4).
Attaching rectangular grille frames
1. Line up the curved edge of the grille with the curve over and press that edge
2.
mount the speakers on the wall
(Figure: 4)
(Figure: 5)
3¾" (94.5mm)

7
CIRCUIT DIAGRAM
PREPARE THE WALL FOR INSERTING THE SPEAKER
Snapping the grille into place
Capacitor
4.7 uF Tweeter
Speaker
4Ω
4Ω
Woofer
Speaker
(Figure: 6)
(Figure: 7)

IM-FSBT43S-BL V1.3
Furrion Innovation Center & Institute of Technology
Ɣ,QGHSHQGHQFH&W(ONKDUW,186AƔTROOIUHH
Ɣ(PDLOLQIR#IXUULRQFRP
FURRION.COM
©2007-2017 Furrion Ltd. Furrion and the Furrion logo are trademarks licensed for use by Furrion Ltd.
and registered in the U.S. and other countries.

FSBT43S-BL
SOUNDBAR SPEAKERS
• Fiberglass reinforced cone extends frequency response and minimizes distortion;
this controls rigidity and internal damping, and delivers high definition audio with a pure, distinct sound.
• Flush mounted design into cabinetry.
HIGH DEFINITION AUDIO VIBRATIONSMART™ CLIMATESMART™

MS-FSBT43S-BL-V.2.6
FSBT43S-BL
|
SOUNDBAR SPEAKERS
Furrion® and the Furrion logo are trademarks licensed for use by Furrion Ltd. and registered in the U.S. and other countries. ©2007-2019 Furrion Ltd.
USA Innovation Center & Institute of Technology: 52567 Independence Ct. Elkhart, IN 46514
Customer Service & Technical Support: Email: [email protected] Tel : [phone] www.furrion.com
Packaging Information
Packaging Type Brown Box
Quantity Per Box (pcs) 1
Individual Packaging Dimensions (L x H x W) 9⁄” x 7⁄” x 5⁄”
(247 x 190 x 149mm)
Individual Packaging Gross Weight (kg/lbs) 2.3/5.1
Individual Packaging Net Weight (kg/lbs) 1.6/3.5
Master Carton
Packaging Type Master Carton Box
Quantity Per Box (pcs) 8
Master Carton Dimensions (L x H x W) 19⁄” x 12⁄” x 15⁄”
(506 x 310 x 395mm)
Master Carton Gross Weight (kg/lbs) 18.5/40.8
Master Carton Net Weight (kg/lbs) 12.8/28.2
Specifications
Voice Coil Electro Impedance 4@1kHz 1V
Resonance Frequency 80±20% Hz
Output Sound Pressure Level 88dB
Characteristic Sensitivity ±3dB
Effective Frequency Band Fo~20kHz
Harmonic Distortion 5% < 1W
≥ 85~10kHz
Power Usage Left "+", Right"-"
Max Power 30W
Outputs on Product 25W
Product Compatibility Furrion stereo products
3⁄” (94.5mm)
7⁄” (181mm)
⁄” (18mm)
⁄” (15.7mm)
1⁄” (40mm)
⁄” (3.4mm) ⁄” (5.5mm)
⁄” (1mm)
⁄” (11.5mm)
1⁄” (41.7mm)
2⁄” (70mm)
2⁄” (65.2mm) 4⁄” (116.7mm)
3⁄” (93.4mm)
⁄” (17.2mm)
3⁄” (91mm)
2⁄” (74.5mm)
8⁄” (203.4mm)
3⁄” (84.2mm)
4⁄” (102.7mm)
4⁄” (118.4mm)