▲
Equipped with Furuno’s latest technology: the Bottom Discrimination Function
- Analyze bottom structure*
tProvides an at-a-glance recognition of bottom form with four types of graphical displays (Rocks/Sand/Gravel/Mud)
when connected to required thru-hull or transom mount transducer.
* Thru-hull or transom transducer mount required
▲
ACCU-FISH
™
- A unique sh size analyzer based on the latest digital technology
▲
White Line feature - Discriminate sh lying near the bottom
tThe top edge of the sea oor is displayed in white to clearly show bottom structures.
tThis feature helps to discriminate weeds and bottom sh distinctly.
▲
Congurable Alarm function (depth, sh echoes, etc.)
▲
Post-processing Gain Control applied to all echoes displayed on the screen
▲
Share and display information on a chartplotter*
tFuruno’s TLL (Target Lat/Lon) output allows you to interface the FCV-587 with your chartplotter
so that you can mark shing spots with various information (L/L, Depth, Water Temp, Fish size, Bottom).
* Required connection to chart plotter.
▲
Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)
▲
Bright 800 cd/m2LCD gives excellent readability, even in bright sunlight
tThe LCD and the AR glass are bonded together to ensure no fogging issues.
tClear visibility even when wearing polarized sunglasses.
“ACCU-FISH
™
” identies individual sh
with size and sh mark function
Recognizes individual or multiple sh instantaneously
ACCU-FISH™ is a revolutionary sh size assessment function of the FCV-587. In
order to assess individual sh size, the echo strength from the sh needs to be
computed and turned into sh size display on the screen. It can detect the sh size of
10 to 199 cm, in the depth of 2 to 100 m.
Displaying sh size or sh depth
Activating the ACCU-FISH™ from the menu, FCV-587 displays sh size on the individual
sh echo. When the ACCU-FISH™ is used concurrently with sh marks, it greatly helps
anglers to identify sh targets on the display. You may also select and display the target
depth instead of sh size, which helps to see how far the sh is from the boat.
Displaying sh marks
The sh mark can be utilized to display on individual sh echoes when detected.
It helps beginners to identify the sh targets on the display for a more fun shing experience.
Fish mark is selectable from two types of sh
symbol, circle and square. The sh symbol, displayed
in two different sizes (Large: over 50 cm, Small: 10
to 49 cm), is a great help for anglers to identify sh
targets. Circle and square indentify targets without
hiding sh echo.
Striped
Solid
Circle
Square
Circles and sh size are displayed on sh
echoes. When in dual frequencies mode, you
can set the mark displayed on both or either
frequency screen.
Bottom Discrimination feature
The FCV-587’s Bottom Discrimination feature enables the sh nder to indicate if the major
component of the bottom is rocks, gravel, sand, mud.
The Bottom Discrimination Function provides you with valuable information to locate rich
shing grounds, while boosting your catch of the day.
White Line function distinguishes sh from bottom
The white line function helps you distinguish bottom sh from the bottom by changing the strongest
signal color to white. This function is not only useful discriminating bottom sh but is also valuable
for judging sh school density. The setting range is 0%-100%,
in intervals of 1%. The higher the value the thicker the line.
Please keep the following in mind when using the Bottom Discrimination Sounder:
1) Use at a depth of 5 m - 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) To show a consistent display of the actual bottom, set the range display
of the sh nder screen to “auto”.
4) Enter the ship’s draft value.
5) Use a ship speed of 10 kn or less.
6)
In some instances, bottom component indicated on the FCV-587 may
differ from its actual bottom structure.
Please read the operation manual
carefully
before using this feature.
The standard graphic display mode shows the most
probable bottom composition by graphic or four colors.
Rocks
Gravel
Sand
Mud
Rocks
Gravel
Sand
Mud
Graphic mode
The probability display mode shows the most
probable bottom composition in graph form.
Probability mode
Field Test
Screen shot from sh reef in lake:
Many sh marks appear on the screen in the thick weed bed.
The white line function helps distinguish bottom and weed from
the actual sh.
In some instances, sh size indicated on the FCV-587 may differ from its actual size.
Please read the operation manual carefully before using this feature.
ViewableBlack out
Post-Processing Gain Control
With conventional gain controls, changes are made for new
echoes only when a change in the gain setting is applied.
With the FCV-587’s Post-Processing Gain Control, changes
in the gain setting are applied to new echoes as well as all
of the echoes already on the screen. Because the changes
are applied to both new and existing returns, you will be
able to quickly and easily nd the right gain setting for your
conditions.
Fish Alarm function
When sh echoes come in the area which you set above the bottom, beeps sound and the alarm icon ashes
at the top right corner of the screen. Furthermore, an integrated alarm setting is also available that can be set
by every and each condition, including water depth, target depth, water temp, bottom component, etc.
Bright LCD for excellent in sunlight viewability
Bright 800 cd/m2LCD gives excellent readability even in bright sunlight.
FCV-587 has a LCD screen which does not "black out" when
wearing polarized sunglasses at certain angles, providing no
loss of visibility while shing.
Conventional FCV-587
Gain: 4Gain: 2
Conventional gain setting
Gain: 4 Gain: 2
Conventional FCV-587