Futuro Futuro NATALIE ISLAND User manual

Futuro FuturoFuturo Futuro
RANGE HOODINSTALLATION MANUALMODEL: NATALIE ISLANDRecommendedInstallationHeight26” - 28”from cooktopto bottomof hoodHeight Xvariable accordingto ceiling height(Ceiling heightminus 36” countertopminus 26”-28” spacing)NOTE: PRIOR TO INSTALLATIONPlease inspect range hood visually,as well as connect it to power supplyand test its operation.1.) Loop supporting wire through lock-nut.2.) Tighten the screw so the wire is secure.211.) Positioning: range hood should be centered over the cooking area.2.) Place mounting ring on ceiling & mark location of holes with marker/awl.3.) Remove mounting ring & drill holes according to markings.4.) Secure mounting ring to ceiling with screws (and if needed, anchors).341.) Thread the supporting wirethrough tabs of mounting ring,with lock-nut/screw combinationINSIDE the ring, as shown.2.) Secure the lock-nut/screwcombinations to the ceiling.1.) Thread supporting wires through trim plate.2.) Raise trim plate to ceiling & secure with screws.3.) Bring range hood body to supporting wires.5

1.) Unscrew trim plate from mounting ring.2.) Lower trim plate.3.) Connect power cord to power line.4.) Replace trim plate & secure screws.7Attach body panels (8 screws total).Make sure to use the supplied nuts/washers,to avoid possibility of damaging the surface.81.) Loosen lock nuts on top of hood body.2.) Thread supporting wire into lock nut.3.) Level & adjust the hood body. (Excess wire can be left hanging inside hood body).4.) Tighten the lock nuts.6