FUXTEC FX-BV140 Product information sheet

Original User Manual FUXTEC FX-BV140 rev03
1

Original User Manual FUXTEC FX-BV140 rev03
2
Intended use
In its standard version, the device is designed as a scarifier for private use, i.e., for use in the garden. The
roller of the scarifier is designed to pull moss and weeds out of the soil and to loosen the dirt. This allows your
lawn to absorb nutrients better and cleans it simultaneously. We recommend that you work your yard in spring
and fall.
Loosening machines are machines for private use, which usually do not exceed a service life of more than 10
hours per year, and are mainly used for the maintenance of small, private lawns and home/hobby gardens. We
generally advise against the use in public facilities, sports halls, and agricultural and forestry applications.
To ensure proper use and maintenance of the device, we advise you to carefully follow and keep the operating
instructions supplied by the manufacturer. The manual contains detailed information about the operating,
maintenance, and service conditions.
CAUTION: Due to the high risk of injury to the user, the device must not be used for shredding branch or
hedge trimmings. Also, the equipment must not be used as a rotary cultivator to level out elevations such as
molehills.
For safety reasons, the scarifier may not be used as a drive for other devices or toolsets of any kind unless
expressly recommended by the manufacturer.
The device may only be used for its intended purpose. Any other use shall be considered misuse. Liability for
any damage or injury of any kind resulting from this is borne by the user and not by the manufacturer.
Please note that our devices are not designed for commercial, trade, or industrial use.

Original User Manual FUXTEC FX-BV140 rev03
3
Content
1. SYMBOLS AFFIXED TO THE PRODUCT ............................................................................................................... 4
2. GENERAL SAFETY PRECAUTIONS ....................................................................................................................... 5
3. INDIVIDUAL SAFETY ............................................................................................................................................... 7
4. GENERAL DESIGNATIONS .................................................................................................................................... 10
5. USER MANUAL ....................................................................................................................................................... 13
6. REPLACING THE ROLLER ..................................................................................................................................... 16
7. FUNCTIONAL DESCRIPTION ................................................................................................................................ 18
8. MAINTENANCE INSTRUCTIONS ......................................................................................................................... 18
9. USE OF GREASE ...................................................................................................................................................... 18
10. CLEANING ............................................................................................................................................................ 19
11. STORAGE AND TRANSPORTATION ................................................................................................................. 20
12.
TROUBLESHOOTING AND REPAIR ................................................................................................................. 21
13. ENVIRONMENT ................................................................................................................................................... 22
14. TECHNICAL DATA .............................................................................................................................................. 22
15. EC DECLARATION OF CONFORMITY ............................................................................................................. 23

Original User Manual FUXTEC FX-BV140 rev03
4
1. SYMBOLS AFFIXED TO THE PRODUCT
SAFETY WARNING SYMBOL: Indicates precautions or safety information. It can also be used
in conjunction with other symbols or images.
Noise level indicator
The tool noise level does not exceed 105dB.
Read this user manual carefully before using the product and
keep it in a safe place for future reference.
Keep a distance to persons in your vicinity.
CE Marking
The product complies with the requirements and regulations of the European
Community.
Avoid rain or humidity.
Always pay attention to eyes and hearing protection.
Caution! Toxic fumes!
Caution! The device must not be used in a closed or poorly ventilated
environment. There is a danger of inhaling poisonous gases!
Be careful not to cut your fingers or toes.
Remove the spark plug lead before performing repair or maintenance work on
the machine.

Original User Manual FUXTEC FX-BV140 rev03
5
2. GENERAL SAFETY PRECAUTIONS
Before using this machine, you must read the instructions in this manual.
Observe the following safety instructions when using this device to avoid the risk of personal
injury or damage to property. Please also observe the specific safety instructions in the respective
chapters. In case of doubt, follow the legal guidelines or regulations for accident prevention when
using the device.
CAUTION! When using machines powered by gasoline, necessary precautions should always be
observed to avoid the risk of severe personal injury and damage to the device.
CAUTION! This machine generates an electromagnetic field during operation. This field may
interfere with active or passive medical implants. To reduce the risk of severe or fatal injury, we
recommend that persons with medical implants inform their doctor and the manufacturer of medical
implants before operating this machine.
TRAINING:
Users must receive proper training in the operation, adjustment, and commissioning of the
machine, including unauthorized operations.
1. Read the instructions carefully. Familiarize yourself with the operating elements and proper operation of
the machine. Before each use, take a moment to familiarize yourself with your device.
2. Never let children or persons, who are not familiar with this manual, use the machine. Local regulations
may limit the age of the operator.
3. This machine is not intended for use by persons (including children) with reduced physical, sensory or
mental abilities or lack of experience and knowledge unless they have been supervised or instructed by a
person responsible for their safety.
4. Never work when persons, especially children or pets, are nearby.
5. Note that the operator or user is responsible for accidents or dangers caused by other persons or their
property.
SAFETY INSTRUCTIONS FOR USING THE VERTICAL MOWING MACHINE
1. Do not run the engine in enclosed spaces as hazardous carbon monoxide may accumulate.
2. Carry out soil cultivation in daylight or under good artificial lighting. If possible, do not use the tiller on wet
grass.
3. Ensure good stability on slopes.
4. Move the machine on foot.
5. For machines on wheels, it is necessary to dig up the ground along the slope, never moving up and down
the hill.
6. Be especially careful when changing the direction of travel on a slope.
7. Do not carry out soil cultivation on steep slopes.
8. Be especially careful when turning the tiller or pulling it towards you.

Original User Manual FUXTEC FX-BV140 rev03
6
9. Stop the tiller blades when the machine is to be tilted so that it can be transported to other areas.
10. Never use the tiller with a defective guard or guard grille without an attached device that is mounted as a
buffer or moss/grass collection basket.
11. Do not change the set engine control. Do not change it under any circumstances.
12. Start the engine carefully. Keep a sufficient distance between your feet and the tiller.
13. Start the engine. The tiller must not be tilted, even if it is to be lifted during the process. Only tilt as far as
necessary and only lift it from the rear (user side).
14. Never reach with hands or feet behind or under the rotating elements. Always keep a distance from the
ejection area.
15. Never lift the tiller and never carry it with the engine running.
16. Switch off the engine and pull out the spark plug connector before removing blockages blocking the
ejection area:
- Before releasing the blockages or removing blockages in the ejection area.
- Before removing the collection bag or before checking, cleaning, or working on the milling machine.
- After hitting an obstacle, before recommissioning and starting work, check for damage to the milling
machine and carry out any necessary repairs. If the milling machine starts to vibrate unusually, it
should be checked immediately.
17. Switch off the engine:
- If you move away from the milling machine.
- Before refueling.
18. When turning off the engine, the ignition switch must be in the OFF position (position OFF or O). The fuel
tap position must be changed to OFF or O.
WORKING RANGE
1. Keep the work area clean and well exposed. Cluttered and dark areas cause accidents.
2. Check the environment in which the machine is used and remove all objects such as stones, toys, sticks,
and wires that could be caught and thrown away. This can cause damage to the machine or injury to the
user.
3. Do not operate this machine in areas with a potentially explosive atmosphere, e.g., in the presence of
flammable liquids, gases, or dust. The device generates sparks, which can ignite the dust or vapors.
4. Keep away children and people present during the operation of the machine. Distractions can cause you to
lose control.

Original User Manual FUXTEC FX-BV140 rev03
7
3. INDIVIDUAL SAFETY
1. This machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities or lack of experience and knowledge unless they are supervised or instructed in the use
of the machine by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the machine.
3. Stay alert, watch what you do, and use common sense when operating this device.
4. Do not use this device if you are tired, ill, or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating this device can cause you to lose control and cause serious injury.
5. Do not overexert yourself. Always make sure you have a good grip and balance. This allows better control
of the tool in unexpected situations.
6. Remove all adjusting keys or wrenches before turning on the machine. A wrench or wrench attached to a
rotating part of the device can cause injury.
7. Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-slip safety
shoes, a hard hat, or hearing protection reduces the likelihood of personal injury.
8. Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from
moving parts. Loose clothing, jewelry, or long hair can get caught in moving parts.
9. If the device is used for a more extended period, vibrations can cause blood circulation problems in the
hands. These effects can be increased by low ambient temperatures and by gripping the handles too tightly.
The service life can be extended by wearing suitable gloves or taking regular breaks from work. Take
frequent work breaks. Limit daily exposure.
USE AND CARE OF GASOLINE-POWERED TOOLS
CAUTION! Gasoline is highly flammable and explosive.
1. Store the fuel in specially designed containers intended for this purpose.
2. Fill up only outdoors, and do not smoke.
3. Fill the fuel before starting the engine. Never remove the cap of the tank or add gasoline while the engine is
running or when the engine is hot.
4. Do not attempt to start the engine if gasoline is spilled, but move the machine away from the spillage area
and avoid creating a source of ignition until the gasoline vapors have dissipated. Afterward, reattach all
tank and container covers securely.
5. Do not operate the engine in a closed room, as dangerous carbon monoxide may accumulate.
6. The gasoline-powered device must not be used forcibly. Use the appropriate tool when refueling. A suitable
tool will do the job better and safer without long trial and error.
7. Never use the gasoline-powered device if the main switch is not working. Any machine that cannot be
operated by a switch is dangerous and must be repaired.
8. Switch off the device entirely before making adjustments, exchanging accessories, or storing tank tools.
Such preventive safety measures will reduce the risk of accidentally starting the device that runs on
gasoline.
9. Keep unused machines out of the reach of children and do not leave this machine to persons who are not
familiar with gasoline-powered devices themselves or with this manual. Petrol tools are dangerous in the
hands of inexperienced operators.
10. The maintenance of petrol tools. Check the alignment for parts of the device that have undergone
makeshift repairs, are broken, and for all other factors that could affect the function of the gasoline tool.

Original User Manual FUXTEC FX-BV140 rev03
8
Have the gasoline tool repaired before use if damaged. Many accidents are caused by poorly maintained,
gasoline-powered tools.
11. Use the gasoline-powered device, accessories, and tools, etc., following this manual and in the manner
intended for the type of gasoline-powered device, taking into account the working conditions and the work
to be performed. Using the gasoline-powered tool for unintended work may cause a dangerous situation.
PERSONAL PROTECTION
Be prepared! Have at least one of the following things at hand:
- a suitable fire extinguisher (dry powder)
- a fully equipped first-aid kit, easily accessible to the machine operator and accompanying person. It should
contain good dressings for lacerations/ cuts.
- a cell phone or other device to quickly call for emergency service.
Do not work alone. There must be another person nearby who is familiar with the basics of first
aid.
The accompanying person must maintain a safe distance from your workplace, but must also be
able to see you all the time! Work only in places where you can quickly call the emergency services!
1. In the event of an injury, always follow the basic principles of first aid.
2. If someone has cut themselves, cover the wound with a clean cloth and press it firmly onto the wound to
stop the blood flow.
3. Do not allow gasoline or oil to come into contact with the skin. Keep gasoline and oil away from the eyes. If
gasoline or oil comes in contact with the eyes, wash them immediately with clean water. If the irritation is
still present, consult a doctor immediately.
4. Persons with poor blood circulation, who are exposed to extreme vibrations, may suffer from injuries to
blood vessels or the nervous system. Vibration may cause the following symptoms in the fingers, hands, or
wrists: "falling asleep" (numbness), tingling, pain, irritation, prickly sensation, change in skin color or skin. If
any of these symptoms occur, also consult a doctor immediately.

Original User Manual FUXTEC FX-BV140 rev03
9
Safety has priority in case of fire:
5. If a fire comes from the engine or smoke escapes from a location other than the exhaust system, first move
away from the device to ensure your physical safety.
6. Use a dry powder fire extinguisher to prevent the fire from spreading.
7. A panic reaction could cause the fire and other damage to take on an even greater scale.
MAINTENANCE AND STORAGE
1. Make sure that all nuts, bolts, and screws are tightened and that the device is in a safe operating condition.
2. Check the catcher regularly for signs of wear and tear and functional impairments.
3. Remember that on devices with gearwheels, the movement of one gearwheel can cause the other
gearwheels to start rotating with it.
4. When adjusting the device, be careful not to get your fingers caught between moving teeth and rigid parts of
the device.
5. When performing maintenance on the teeth, be aware that the teeth can still move even when the engine is
switched off.
6. For your safety, worn or damaged parts should be replaced immediately. Use only original spare parts and
original accessories.
7. Store the device in a place out of reach of children.
8. Never store the machine with gasoline in the tank inside a building where vapors can cause a naked flame
or spark.
9. Let the engine cool down before storing it in any enclosure.
10. To reduce the risk of fire, keep the engine, silencer, battery compartment, and fuel storage compartment
free of grass, straw, moss, leaves, or excess grease.
11. If it is necessary to empty the fuel tank, do so outdoors. The emptied fuel should be stored in a container
specially designed for fuel storage or disposed of properly.

Original User Manual FUXTEC FX-BV140 rev03
10
4. GENERAL DESIGNATIONS
Fig.1
1. Upper handle 2. The height adjustment lever 3. Engine starter
4. Grass collector 5. Wheel 6. Knob for height adjustment
7. Locking knob 8. Brake lever
1
2
3
5
7
4
6
8

Original User Manual FUXTEC FX-BV140 rev03
11
4. ASSEMBLY
4.1 CLIP HANDLE
1. Fasten the lower handlebar in the body of the machine using bolts, washers, and locking attachments.
(Fig.2A/ Fig.2B/ Fig.2C)
2. Connect the lower handlebar and the upper handlebar with screws, washers, and locking attachments.
(Fig.2D/ Fig.2E/ Fig.2F)
3. Attach the cable clamps at the marked position and then fasten the cable. (Fig.2G)
Fig.2A Fig.2B Fig.2C
Fig.2D Fig.2E Fig.2F
Fig.2G
Screw Washer
Locking
attachment
Screw
Washer
Closure-
attachment
Cable Clamp

Original User Manual FUXTEC FX-BV140 rev03
12
4.2 SETTING THE APPROPRIATE ANGLE
1. Unscrew the locking attachments with which the lower handle was fixed. (Fig.3A)
2. Move the lower handle up or down and adjust it to the desired height. With this scarifier, 2 setting heights
can be selected; at 2 height levels, the lower handle is highest to the ground, and at one height, it is lowest.
3. Set the correct height and then attach the lower handle with the locking attachments.
CAUTION: The left and right sides of the lower handle must be adjusted to the same height.
Fig.3A
4.3 MOUNTING AND DISMOUNTING THE GRASS COLLECTOR
To attach: Lift the rear cover and hang the grass collector on the rear of the scarifier. (Fig.4A/Fig.4B/Fig.4C).
To remove: Grip and lift the rear cover, remove grass collector.
CAUTION: Before connecting the grass collector to the device, make sure that the engine is switched off,
and the mowing unit is not rotating.
Fig. 4A Fig. 4B Fig. 4C
1
2

Original User Manual FUXTEC FX-BV140 rev03
13
4.4 STARTER
Move the throttle lever from the engine to the cable guide. (Fig.5)
Fig.5
4.5 CUTTING DEPTH
Move the lever outward to release it from the rack. Move the lever forward or backward to adjust the height.
(Fig.6 and see 6.4).
Fig. 6
5. USER MANUAL
Maintain the engine as described in the separate engine manual for your scarifier, with gasoline and oil. Read
the instructions carefully.
CAUTION! Gasoline is highly flammable.
Store the fuel in containers specially designed for this purpose.
Only refuel outdoors and before starting the engine. Do not smoke while refueling or working with the fuel.
Never remove the fuel tank cap or add gasoline while the engine is running or when the engine is hot.
Do not start the engine if gasoline is spilled. In this case, the machine must be moved away from the spillage
area, and no source of ignition must be created until the petrol vapors have evaporated.
Securely fasten all fuel tanks and container lids in their original place.
Before tilting the scarifier to service the blades or drain oil, there must be no fuel left in the tank.
CAUTION: Never refill the fuel tank in enclosed spaces, while the engine is running or before the engine
has cooled down for at least 15 minutes after start-up.

Original User Manual FUXTEC FX-BV140 rev03
14
5.1 TO START THE ENGINE
1. Before you start the engine, please turn the engine switch to "ON." (Fig.7A)
3. To start a cold engine, set the throttle stick to "On" (Fig. 7B). Move the throttle lever to the "Off" position.
(Fig.7B).
4. Stand behind the device, grasp the brake lever, and hold it against the lower handle.
(Fig.7C)
5. Hold the brake lever as shown in Fig.7C and quickly pull up the starter handle, as shown in Fig.7D. After
starting the engine, slowly return it to the cable guide pins.
6. Set the throttle lever to the "On" position. (Fig.7F)
NOTE! If the cutting unit comes into contact with the ground, the device may move jerkily.
Fig.7A Fig.7B Fig.7C
Throttle lever
Fig.7D Fig.7E
Carburetor lever Grasp the brake
lever.

Original User Manual FUXTEC FX-BV140 rev03
15
5.2 TO STOP THE ENGINE
CAUTION: After the engine is turned off, the blade continues to rotate for several seconds.
1. Release the brake lever to stop the engine and blade. (Fig. 8A)
2. Set the engine switch to the "OFF" position. (Fig.8B)
Fig.8A Fig.8B
5.3 GRASS COLLECTOR
5.3.1 Working without grass collector (optional)
With the scarifier, you can work with or without a grass collector. Whenever you remove the grass collector, the
protective flap falls. When mowing the lawn without an attached grass collector, the cut grass is thrown directly
onto the ground. (Abb.9A)
5.3.2 Working with the grass collector When working with the grass collector, the cuttings are disposed of
via the grass collector. When the grass collector bag is full of clippings, you must empty the grass collector bag
and clean it.
1. Switch off the engine and wait until it stops.
2. Raise the protective flap and release the grass collector bag. (Fig.9B)
3. Empty the contents.
Fig.9A Fig.9B

Original User Manual FUXTEC FX-BV140 rev03
16
5.4 INSTRUCTIONS FOR HEIGHT ADJUSTMENT
CAUTION: Never adjust the scarifier at any time without first switching off the engine.
Your scarifier is equipped with a lever for height adjustment, which offers an unlimited number of working
positions. The working positions are dimensioned in -3mm, -6mm, -9mm, -12mm, and -15mm height.
1. Stop the scarifier and disconnect the spark plug cable before changing the cutting height of the device.
2. To change the cutting height, turn the front knob clockwise or vice versa to the desired height.
3. Move the transport lever to transport position to prevent the mowing deck from touching the ground when
the work is finished.
Fig.10A Fig.10B
6. REPLACING THE ROLLER
CAUTION: Make sure to wear work gloves.
Caution: Only use original scarifier/aerator shafts approved by the manufacturer.
The device can be mounted with the scarifier roller or the aerator roller.
Only replace the roller with an original roller as this ensures optimum performance and safety under all
conditions.
To change the scarifier roller or the optionally available aerator roller, proceed as follows
1. Switch off the engine and let it cool down.
2. Remove the spark plug connector.
3. Remove the grass collector.
Lift the device slightly at the front.
Note: Do not lift the machine too high. Otherwise, fuel may leak from the tank. Drain fuel if necessary
before changing the roller.
Blade up Blade down

Original User Manual FUXTEC FX-BV140 rev03
17
Remove the roller.
1. Remove the four screws. (Fig.11B)
2. Lift the roller and pull it out in the direction of the arrows. (Fig.11C)
Fig.11A Fig.11B
Attach the roller.
1. Push the new roller in the direction of the arrows, insert the shaft into the hexagon socket and press the
other side into the holder. (Fig.11C/ Fig.11D/ Fig.11E).
2. Fasten the roller again with the two screws.
3. Check if the roller is seated correctly.
4. Fix the aerator roller and the scarifier roller. (Fig.11F/ Fig.11G/ Fig.11H).
Fig.11C Fig.11D Fig.11E
Fig.11F Fig.11G
Fig.11H

Original User Manual FUXTEC FX-BV140 rev03
18
7. FUNCTIONAL DESCRIPTION
The scarifier is pushed by hand over the grass area to be dug. A petrol engine drives the cutting tools.
The cutting depth is set by adjusting the individual central height adjustment mechanism.
Loosening up:
Through its rotation, the cutting unit removes the felt layer formed by moss, lichen, and weeds. It transports the
loosened material to the outside or into the grass collector. During cutting, the blades penetrate the soil and
ensure that the lawn is loosened, and the nutrients can be better absorbed. We recommend loosening the yard
in spring (April/May) and autumn (October).
Aerate:
The cutting mechanism (the aeration roller) rotates, combs the lawn, and aerates the slightly mossy areas. The
removed moss is transported to the outside or into the grass collector. During aeration, the soil surface is
rubbed down, which improves drainage and, at the same time, facilitates the absorption of oxygen.
We recommend aerating the lawn as needed throughout the vegetation period.
8. MAINTENANCE INSTRUCTIONS
IGNITION PLUG
Only use original spark plugs for replacement. For best results, replace the spark plug every 100 operating
hours.
BRAKE PADS
Check and replace the engine brake pads regularly at the customer service. Only original parts can be used for
replacement.
9. USE OF GREASE
CAUTION: PULL OUT THE SPARK PLUG BEFORE MAINTENANCE.
1. WHEELS - Lubricate the ball bearings with a light lubricant at least once per season.
2. ENGINE - Follow the engine manual for lubrication information.

Original User Manual FUXTEC FX-BV140 rev03
19
10. CLEANING
CAUTION: Do not spray the engine with a hose. There is a risk of water damaging the engine or
contaminating the fuel system.
1. Wipe the canopy with a dry cloth.
2. Clean the deck by tilting the scarifier so that the spark plug points upwards.
10.1 ENGINE AIR FILTER
CAUTION: Do not allow dirt or dust to clog the foam element of the air filter.
The engine air cleaner element must be serviced (cleaned) after 25 hours of regular use. If the machine is
used in dry, dusty conditions, the foam element must be checked regularly.
CLEANING THE AIR FILTER
1. Remove the cover. (Fig.12A)
2. Blow away the dust of the filter element. (Fig.12B).
3. Apply a few drops of SAE30 oil to the foam filter and then press firmly together to remove excess oil.
4. Reinstall the filter.
5. Close the filter cover.
NOTE: Replace the filter if it is frayed, torn, damaged, or if it seems impossible to clean it.
Fig.12A Fig.12B
10.2 ENGINE
The maintenance instructions for the engine can be found in the separate engine manual.
Store the engine oil according to the instructions in the separate engine manual that comes with your device.
Read and follow the instructions carefully.
Maintain the air filter according to the separate engine manual under normal conditions. Under extremely dusty
conditions, the air filter must be cleaned every few hours. Poor engine performance and clogging usually
indicate that the air filter should be serviced.
Refer to the separate engine manual that came with your device for information on how to service the air filter.
The spark plug should be cleaned once per season, and the air filter slide-in should be reset. Spark plug
replacement is recommended at the beginning of each season; check the engine manual for the correct plug
type.
Filter cover
Filter element
Tab

Original User Manual FUXTEC FX-BV140 rev03
20
Clean the engine regularly with a cloth or brush. Keep the cooling system (area of the housing fan) clean to
allow proper air circulation, which is essential for engine performance and life. Be sure to remove all grass, dirt,
and combustible deposits from the muffler area.
11. STORAGE AND TRANSPORTATION
Storage
The following steps should be taken to prepare the mower for storage.
1. Empty the tank.
a) Empty the fuel tank with a suction pump.
CAUTION! Do not drain the gasoline in closed rooms and the immediate vicinity of open fire etc. Do not
smoke under any circumstances! Gasoline vapors can cause explosions or fires.
b) Start the engine and let it run until it has used up all remaining fuel reserves and deposits.
c) Remove the spark plug. Use an oil can to fill approx. 20 ml of oil into the combustion chamber. Operate the
starter to distribute the oil evenly over the combustion chamber. Reinsert the spark plug.
2. Clean and grease the scarifier carefully, as described in the upper chapter "Use of Grease."
3. Lightly grease the blades to prevent corrosion.
4. Store the scarifier out of reach of unauthorized persons and in a dry, clean, and frost-free place.
CAUTION! The engine must be completely cooled down before storing the lawnmower.
NOTE: When storing any type of power equipment in an unventilated or material storage facility,
- it must be ensured that the device is stainless. Coat the device, especially cables and all moving parts, with
light oil or silicone.
- Make sure that you do not bend or kink any cables.
- if the starter cable comes loose from the cable guide on the handle, disconnect and ground the spark plug
wire, press the blade control lever, and then slowly pull the starter cable out of the engine. Slide the starter
cable into the cable guide pins on the handle.
Transportation
1. Move the transport lever into the transport position.
2. Switching off the engine
Danger!
Before transport, always switch off the engine and let it cool down and remove the spark plug connector. The
device must not be tilted during transport. When transporting the scarifier in or on a vehicle, make sure that it
does not move unintentionally.
Empty the fuel tank before transporting the device. The fuel tank cap must be firmly closed.