FUXTEC FX-GW350 User manual

Assembly instruction
FUXTEC
garden equipment trolley
FX-GW350

The garden equipment trolley consists of painted steel and air-filled wheels. It is equipped
with a non-slip handle and non-slip wheels.
ATTENTION: Read this instruction carefully before assembling and using the trolley. This
trolley is not a toy! Under no circumstances should children ride or play with this trolley.
WARNINGS:
 Watch out for sharp metal edges when opening the product
 Observe the usual precautions when using tools
 Do not inflate the tyres above the intended pressure
 Before use, make sure that all screws are tightly fitted
 Do not use the wagon if it is damaged
 Keep the wagon out of the reach of children
Scope of delivery:
Scope of small parts:
1) Screw short (4x)
2) Screw long (1x)
3) Nut (9x)
4) Discs small (9x)
5) Safety pins (8x)
6) Discs large (5x)
7) Safety pins (5x)
Rear
axle
Front axle support
Handle
Base plate
Short side panel
Long side
panel
Wheel
Front axle

Assembly:
Mount the garden trolley, as shown below.
The letters mark the main parts; the numbers mark the small parts