FUXTEC FX-RL400 User manual
Assembly instructions FUXTEC Lawn Aerator FX-RL400
Assembly instructions
Please note before use:
Please read the instructions carefully and make yourself familiar with the device.
Please follow the assembly instructions step by step and check all parts for
completeness. To prevent damage to the components, please place them all on the
floor. Keep sharp-edged parts and packaging out of the reach of children. If parts are
dirty, please clean them with a duster; do not use abrasive cleaners.
Usage
The lawn aerator should not be knocked uncontrollably. The best results are achieved
when the lawn is slightly moist. Sufficient ventilation is achieved by increasing the
pressure on the lawn aerator via the hand guide.
Assembly instructions FUXTEC Lawn Aerator FX-RL400
Warning
Prevent contact with the ventilation mandrels. These are sharp and can cause serious
injury if not used correctly.
Maintenance
Please clean the ventilation thorns and the wheels carefully after use. Store in a dry
place. Please lubricate all moving parts with a little conventional oil regularly to ensure
proper use over the long term.
FUXTEC GmbH, Kappstraße 69, 71083 Herrenberg, Germany
Contact: [email protected] or www.fuxtec.de
Table of contents
Other FUXTEC Lawn And Garden Equipment manuals
